Now is a good time to fill the trans with 3 quarts of non-synthetic gear lube. Just make sure you have a yoke in the rear to keep it all in !!!


After preassembling all levers, actual shifter and brackets for proper fit, take it all back apart and get ready to install the engine assembly into the car. We had plenty of help to insure ease and safe entry into the engine compartment. Make sure the trans mount and crossmember are all ready to go also..Get all bolts and threadlock close also..
Make sure motor mounts are tight and where you think they need to be. Hook the motor and roll it into the engine bay.Lower onto K member and adjust so motor mounts are lined up and bolt into place.