Quote:
at that light of weight it could likely even be done with an eddie head...but a w2 motor would surely do it,any other head would more than get it done(W5/INDY...ETC)
If i were to do it the cheapest way,this is what i would do
904 trans
5100-5200 flash 8 inch convertor
ryan ported eddie heads
13-1 compression
a roller along the lines of about 266/272 at 50 about 650 lift
good hp 950 carb
1/78 headers
should go 10 flat relatively easy...
Light travels faster than the speed of sound,,,this is why some people seem bright untill you hear them speak.
| 
