Me thinks there is something goofy in this motor whiney work
Was the cam degreed? If so do you know where the intake lobe center was installed at? IF so, were?
If not it should be, I've built and dyno a bunch of BB Mopar stroker motors with similar parts and they made peak power above 6000 RPMs, more HP, power and torque than yours shruggy
What about valve spring pressures?
I'll look at your first post again to see if that was listed or not.
EDITED, 2nd look, I see the comment about retarding the cam 4 degrees, why? shruggy
Every BB Mopar motor I've dyno and change the cam LSA timing liked from 2 to 6 degrees advanced on the intake lobes, none of them like straight up or retarded on the intake lobes, none of them.
That being said I have never used a cam as large as yours is on the duration shruggy
I'm still learning so thanks a bunch for posting your dyno sheets bow up

Last edited by Cab_Burge; 03/15/23 05:19 PM.
Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)