Originally Posted by dstryr
Originally Posted by not_a_charger
Assuming the spindle isn't damaged, you shouldn't have to do anything to it or to the hub. confused The radius rod, the strut, and the 2 lower control arms determine the position of the spindle. If nothing else is bent other than the front lower control arm, what are you concerned with regarding the spindle not being able to be moved to it's proper position?


It is part # 24 that is bent. Once removed, I'm just asking if the spindle/hub should somewhat freely come back into line or if I might have to rig something to help pull the wheel/hub straight so that the new arm will line up on the bolt holes. Pretty straight forward question I thought.


I am going to guess it will return close enough that the new arm will go back into place with the same level of difficulty of any other suspension part. It might require some wrestling but I bet it goes together OK.

68 Barracuda Formula S 340