Part 2-Molnar H-beam connecting rods, 7.100” long, 2.200” rod journals. Component Observations.
CH7100VTB8-A - ARP2000
I posted almost all the info in Part 1. I did measure the length of one rod to the best of my ability, and it checked right at 7.100"
In the past, I measured a set of 6.535 rods from another manufacturer, and they were only 6.530" Final assembly confirmed the piston was 0.005" lower than it should have been.
Here are some beam measurements, FWIW.
These are some beefy beams, IMO. Likely a design decision since they are so long.
Last edited by 440Jim; 05/21/21 09:04 PM. Reason: Added length comment