Made a couple light pulls but the puke tank is getting a ton of oil through the vacuum pump. I have the Ritter intake and have the pickup for the vacuum pump coming out of the oil fill. The valve covers are not very friendly for a fitting. Who has ever used a vac pump on one of these and where do you put the fitting. We leaked the engine and it leaks 4% cold so I don't think it's that the engine has blowby. This thing is pushing a bunch of oil in the higher RPMs.
I also use a Ritter intake and a vac pump, very little oil in the tank. I drilled and tapped the manifold just under the oil filler and drilled and tapped the other side of the intake at the passage in the head. I put a tee in the vacuum line and pull from both sides on the engine. This way I cut down on the air speed and it does not pick up as much oil.
