I redid the heads on my W2 small block and made some small adjustments on the intake and rockers. I was lazy and slow putting it together. When I finally got it in and running the trans leaked, cracked converter snout. I decided to freshen the trans, and I put a converter in I borrowed from my Dad. Front seal leak, pulled pump, changed bushing and seal, leaked. Changed pump, with new sonax bushing, new seal, rubber backed washers, leaks. I said screw this and gave up about august. I do think my engine mods turned out OK from looking at the data from the one wide open hit I made. I was just glad the cops didn't hear it then follow the fluid trail back to my house lol.

My original converter is back from TA with an A500 snout so I will be trying this again shortly. I hate transmission fluid.