Drill for clearance, or replace?

Print Thread

Re: Drill for clearance, or replace? [Re: Diplomat360] #2705733 10/10/19 10:41 PM 10/10/19 10:41 PM
Joined: Jan 2003 Posts: 5,791 Hamilton, Ontario Canada Magnum master
Magnum master Joined: Jan 2003 Posts: 5,791 Hamilton, Ontario Canada	Originally Posted by Diplomat360 The HS folks did actually say that an oil restrictor may be needed given the design of their rocker arms. A factory rocker system needs the volume and the rocker on the shaft becomes the restriction to regulate the proper amount of oil. A full radius bearing is just a giant leak around a rocker shaft. I can see pressurized oil in a rocker shaft sending too much oil to the rocker bearings. I'd say leave it and it will still be too much oil. 69 Super Bee, 93 Mustang LX, 04 Allure Super

Entire Thread
Subject	Posted By	Posted
Drill for clearance, or replace?	Diplomat360	10/04/19 10:13 PM
Re: Drill for clearance, or replace?	Sniper	10/04/19 10:26 PM
Re: Drill for clearance, or replace?	Cab_Burge	10/04/19 10:34 PM
Re: Drill for clearance, or replace?	lewtot184	10/04/19 10:42 PM
Re: Drill for clearance, or replace?	Sniper	10/04/19 11:02 PM
Re: Drill for clearance, or replace?	70sixpkrt	10/04/19 11:04 PM
Re: Drill for clearance, or replace?	MoparMike1974	10/05/19 04:00 AM
Re: Drill for clearance, or replace?	fastmark	10/05/19 10:32 AM
Re: Drill for clearance, or replace?	440_Offroader	10/05/19 03:43 PM
Re: Drill for clearance, or replace?	Sniper	10/05/19 03:56 PM
Re: Drill for clearance, or replace?	451Mopar	10/05/19 04:12 PM
Re: Drill for clearance, or replace?	RapidRobert	10/05/19 04:59 PM
Re: Drill for clearance, or replace?	pittsburghracer	10/05/19 11:41 PM
Re: Drill for clearance, or replace?	Diplomat360	10/06/19 01:34 PM
Re: Drill for clearance, or replace?	IMGTX	10/06/19 02:08 PM
Re: Drill for clearance, or replace?	Magnum	10/11/19 02:41 AM
Re: Drill for clearance, or replace?	IMGTX	10/12/19 03:16 PM

Hop To