Drill for clearance, or replace?

Print Thread

Re: Drill for clearance, or replace? [Re: Diplomat360] #2703914 10/04/19 06:34 PM 10/04/19 06:34 PM
Joined: Aug 2003 Posts: 43,237 Bend,OR USA C Cab_Burge I Win
Cab_Burge I Win C Joined: Aug 2003 Posts: 43,237 Bend,OR USA	Do your heads need the oil feeding to the rocker shafts or no ? If not don't worry about that hole, I wouldn't If the heads need the oiling to the rocker shafts get it fix now It has been a while since I've install L.A. cam bearing, I'm thinking the #2 and #4 cam bearings should have full oil grooves in them maybe not Thinking about that some more the heads with rocker arm shafts get oiled through the hole in the camshaft, don't they Last edited by Cab_Burge; 10/04/19 06:35 PM. Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)

Entire Thread
Subject	Posted By	Posted
Drill for clearance, or replace?	Diplomat360	10/04/19 10:13 PM
Re: Drill for clearance, or replace?	Sniper	10/04/19 10:26 PM
Re: Drill for clearance, or replace?	Cab_Burge	10/04/19 10:34 PM
Re: Drill for clearance, or replace?	lewtot184	10/04/19 10:42 PM
Re: Drill for clearance, or replace?	Sniper	10/04/19 11:02 PM
Re: Drill for clearance, or replace?	70sixpkrt	10/04/19 11:04 PM
Re: Drill for clearance, or replace?	MoparMike1974	10/05/19 04:00 AM
Re: Drill for clearance, or replace?	fastmark	10/05/19 10:32 AM
Re: Drill for clearance, or replace?	440_Offroader	10/05/19 03:43 PM
Re: Drill for clearance, or replace?	Sniper	10/05/19 03:56 PM
Re: Drill for clearance, or replace?	451Mopar	10/05/19 04:12 PM
Re: Drill for clearance, or replace?	RapidRobert	10/05/19 04:59 PM
Re: Drill for clearance, or replace?	pittsburghracer	10/05/19 11:41 PM
Re: Drill for clearance, or replace?	Diplomat360	10/06/19 01:34 PM
Re: Drill for clearance, or replace?	IMGTX	10/06/19 02:08 PM
Re: Drill for clearance, or replace?	Magnum	10/11/19 02:41 AM
Re: Drill for clearance, or replace?	IMGTX	10/12/19 03:16 PM

Hop To