Drill for clearance, or replace?

Print Thread

Re: Drill for clearance, or replace? [Re: Cab_Burge] #2703916 10/04/19 06:42 PM 10/04/19 06:42 PM
Joined: Jun 2008 Posts: 3,916 usa L lewtot184 master
lewtot184 master L Joined: Jun 2008 Posts: 3,916 usa	you might want to look at a service manual or oiling schematic. some of those cam bearings were purposely made for the feed hole to be partially blocked. if the cam bearing journals are grooved i'd leave it alone.

Entire Thread
Subject	Posted By	Posted
Drill for clearance, or replace?	Diplomat360	10/04/19 10:13 PM
Re: Drill for clearance, or replace?	Sniper	10/04/19 10:26 PM
Re: Drill for clearance, or replace?	Cab_Burge	10/04/19 10:34 PM
Re: Drill for clearance, or replace?	lewtot184	10/04/19 10:42 PM
Re: Drill for clearance, or replace?	Sniper	10/04/19 11:02 PM
Re: Drill for clearance, or replace?	70sixpkrt	10/04/19 11:04 PM
Re: Drill for clearance, or replace?	MoparMike1974	10/05/19 04:00 AM
Re: Drill for clearance, or replace?	fastmark	10/05/19 10:32 AM
Re: Drill for clearance, or replace?	440_Offroader	10/05/19 03:43 PM
Re: Drill for clearance, or replace?	Sniper	10/05/19 03:56 PM
Re: Drill for clearance, or replace?	451Mopar	10/05/19 04:12 PM
Re: Drill for clearance, or replace?	RapidRobert	10/05/19 04:59 PM
Re: Drill for clearance, or replace?	pittsburghracer	10/05/19 11:41 PM
Re: Drill for clearance, or replace?	Diplomat360	10/06/19 01:34 PM
Re: Drill for clearance, or replace?	IMGTX	10/06/19 02:08 PM
Re: Drill for clearance, or replace?	Magnum	10/11/19 02:41 AM
Re: Drill for clearance, or replace?	IMGTX	10/12/19 03:16 PM

Hop To