67 Barracuda 3380# race ready
511 LD 11.25:1
MW victor heads cnc'd by hughes 330cc port flows 356@.600 .700
uses HS 1.6/1.5 rockers
SFT cam spec'd by Dwayne 270/276@50-.644/.615-110
Indy 400-3 with 1" 4 hole tapered
2" mad dog headers 3.5 coll
727 w/reverse manual
8" vert 5100 stall/flash by Lenny@Ultimate
Dana 4.10 28" M/T ET R radials
I have read on other mopar sites guys using these victors disappointed as I unless they have 13:1 or more compression. Not many make over 700hp with the victor head.
IMO, that 63 Champion is a bit cold for that CR on pump gas. You can get that in a 65. That's only 1 range hotter. Without seeing the shell it's hard to say how much hotter you should go, but I'm going to say that 63 is too cold.