8 3/4 spool with stock axel bearings..

Print Thread

Re: 8 3/4 spool with stock axel bearings.. [Re: Demoman] #261994 03/24/09 12:13 AM 03/24/09 12:13 AM
Joined: Nov 2004 Posts: 2,825 Sk. Canada RemCharger master
RemCharger master Joined: Nov 2004 Posts: 2,825 Sk. Canada	What about axles out of another car that are .75 of an inch longer or so? As far as end play, about .010" on both sides is good.

Entire Thread
Subject	Posted By	Posted
8 3/4 spool with stock axel bearings..	Demoman	03/22/09 08:04 PM
Re: 8 3/4 spool with stock axel bearings..	slantzilla	03/22/09 08:25 PM
Re: 8 3/4 spool with stock axel bearings..	MR_P_BODY	03/22/09 08:50 PM
Re: 8 3/4 spool with stock axel bearings..	MoparforLife	03/22/09 09:38 PM
Re: 8 3/4 spool with stock axel bearings..	webemopes	03/22/09 09:49 PM
Re: 8 3/4 spool with stock axel bearings..	MoparforLife	03/22/09 10:13 PM
Re: 8 3/4 spool with stock axel bearings..	Demoman	03/23/09 11:46 PM
Re: 8 3/4 spool with stock axel bearings..	MR_P_BODY	03/23/09 11:59 PM
Re: 8 3/4 spool with stock axel bearings..	CJK440	03/24/09 12:16 AM
Re: 8 3/4 spool with stock axel bearings..	Bob_Coomer	03/24/09 12:29 AM
Re: 8 3/4 spool with stock axel bearings..	Demoman	03/24/09 12:39 AM
Re: 8 3/4 spool with stock axel bearings..	Bob_Coomer	03/24/09 12:58 AM
Re: 8 3/4 spool with stock axel bearings..	446acuda	03/24/09 01:00 AM
Re: 8 3/4 spool with stock axel bearings..	MoparforLife	03/24/09 01:07 AM
Re: 8 3/4 spool with stock axel bearings..	MR_P_BODY	03/24/09 01:12 AM
Re: 8 3/4 spool with stock axel bearings..	slantzilla	03/24/09 01:25 AM
Re: 8 3/4 spool with stock axel bearings..	MR_P_BODY	03/24/09 01:38 AM
Re: 8 3/4 spool with stock axel bearings..	DoctorDiff	03/24/09 01:45 AM
Re: 8 3/4 spool with stock axel bearings..	fourgearsavoy	03/24/09 01:57 AM
Re: 8 3/4 spool with stock axel bearings..	dave571	03/24/09 02:35 AM
Re: 8 3/4 spool with stock axel bearings..	MR_P_BODY	03/24/09 02:40 AM
Re: 8 3/4 spool with stock axel bearings..	Demoman	03/24/09 03:59 AM
Re: 8 3/4 spool with stock axel bearings..	RemCharger	03/24/09 04:13 AM
Re: 8 3/4 spool with stock axel bearings..	Demoman	03/24/09 04:22 AM
Re: 8 3/4 spool with stock axel bearings..	MoparforLife	03/24/09 12:14 PM
Re: 8 3/4 spool with stock axel bearings..	JohnRR	03/24/09 04:38 PM
Re: 8 3/4 spool with stock axel bearings..	RemCharger	03/24/09 08:06 PM
Re: 8 3/4 spool with stock axel bearings..	Demoman	03/24/09 11:51 PM
Re: 8 3/4 spool with stock axel bearings..	Demoman	01/25/11 01:08 AM
Re: 8 3/4 spool with stock axel bearings..	Randy..	01/25/11 02:20 AM
Re: 8 3/4 spool with stock axel bearings..	Cab_Burge	01/25/11 04:45 AM
Re: 8 3/4 spool with stock axel bearings..	cbarracuda	01/25/11 06:17 AM
Re: 8 3/4 spool with stock axel bearings..	Demoman	01/25/11 07:46 AM
Re: 8 3/4 spool with stock axel bearings..	340B5	03/24/09 01:26 AM
Re: 8 3/4 spool with stock axel bearings..	JohnRR	03/24/09 04:35 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To