8 3/4 spool with stock axel bearings..

Print Thread

Re: 8 3/4 spool with stock axel bearings.. [Re: MoparforLife] #261975 03/22/09 05:49 PM 03/22/09 05:49 PM
Joined: Oct 2005 Posts: 268 South Central Pa webemopes enthusiast
webemopes enthusiast Joined: Oct 2005 Posts: 268 South Central Pa	spools are open thru the center between the axles so you don`t have any way to adjust end play since there is no pin for the axle end to push against,so you must use the 'green bearings' .

Entire Thread
Subject	Posted By	Posted
8 3/4 spool with stock axel bearings..	Demoman	03/22/09 08:04 PM
Re: 8 3/4 spool with stock axel bearings..	slantzilla	03/22/09 08:25 PM
Re: 8 3/4 spool with stock axel bearings..	MR_P_BODY	03/22/09 08:50 PM
Re: 8 3/4 spool with stock axel bearings..	MoparforLife	03/22/09 09:38 PM
Re: 8 3/4 spool with stock axel bearings..	webemopes	03/22/09 09:49 PM
Re: 8 3/4 spool with stock axel bearings..	MoparforLife	03/22/09 10:13 PM
Re: 8 3/4 spool with stock axel bearings..	Demoman	03/23/09 11:46 PM
Re: 8 3/4 spool with stock axel bearings..	MR_P_BODY	03/23/09 11:59 PM
Re: 8 3/4 spool with stock axel bearings..	CJK440	03/24/09 12:16 AM
Re: 8 3/4 spool with stock axel bearings..	Bob_Coomer	03/24/09 12:29 AM
Re: 8 3/4 spool with stock axel bearings..	Demoman	03/24/09 12:39 AM
Re: 8 3/4 spool with stock axel bearings..	Bob_Coomer	03/24/09 12:58 AM
Re: 8 3/4 spool with stock axel bearings..	446acuda	03/24/09 01:00 AM
Re: 8 3/4 spool with stock axel bearings..	MoparforLife	03/24/09 01:07 AM
Re: 8 3/4 spool with stock axel bearings..	MR_P_BODY	03/24/09 01:12 AM
Re: 8 3/4 spool with stock axel bearings..	slantzilla	03/24/09 01:25 AM
Re: 8 3/4 spool with stock axel bearings..	MR_P_BODY	03/24/09 01:38 AM
Re: 8 3/4 spool with stock axel bearings..	DoctorDiff	03/24/09 01:45 AM
Re: 8 3/4 spool with stock axel bearings..	fourgearsavoy	03/24/09 01:57 AM
Re: 8 3/4 spool with stock axel bearings..	dave571	03/24/09 02:35 AM
Re: 8 3/4 spool with stock axel bearings..	MR_P_BODY	03/24/09 02:40 AM
Re: 8 3/4 spool with stock axel bearings..	Demoman	03/24/09 03:59 AM
Re: 8 3/4 spool with stock axel bearings..	RemCharger	03/24/09 04:13 AM
Re: 8 3/4 spool with stock axel bearings..	Demoman	03/24/09 04:22 AM
Re: 8 3/4 spool with stock axel bearings..	MoparforLife	03/24/09 12:14 PM
Re: 8 3/4 spool with stock axel bearings..	JohnRR	03/24/09 04:38 PM
Re: 8 3/4 spool with stock axel bearings..	RemCharger	03/24/09 08:06 PM
Re: 8 3/4 spool with stock axel bearings..	Demoman	03/24/09 11:51 PM
Re: 8 3/4 spool with stock axel bearings..	Demoman	01/25/11 01:08 AM
Re: 8 3/4 spool with stock axel bearings..	Randy..	01/25/11 02:20 AM
Re: 8 3/4 spool with stock axel bearings..	Cab_Burge	01/25/11 04:45 AM
Re: 8 3/4 spool with stock axel bearings..	cbarracuda	01/25/11 06:17 AM
Re: 8 3/4 spool with stock axel bearings..	Demoman	01/25/11 07:46 AM
Re: 8 3/4 spool with stock axel bearings..	340B5	03/24/09 01:26 AM
Re: 8 3/4 spool with stock axel bearings..	JohnRR	03/24/09 04:35 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To