Originally Posted By gsmopar
Originally Posted By Jeremiah
Originally Posted By gsmopar
This was the closes thing to an "Easy Button" that I've found for my car. I just had to drill a couple holes:

http://www.speedcooling.com/26-Big-Block-Mopar-Radiator-Dual-Fans.html


Can you measure the depth of that setup from the core support to the nose of the fans? It looks great and the price is nice too.


~7.5 inches from the support to the back of the fan motors. I was able to center the water pump between the fans to gain clearance. My car must have had the smaller radiator as I had to drill holes and use 1/4in spacers between the support and radiator mount:







Looks familiar... LOL. Looking good. Mine was tight & I mounted my over flow bottle the same way.

rsz_20161118_201142_003.jpgrsz_20161201_200820_003.jpg
1963 Belvedere 440 Max Wedge Tribute
1970 Charger R/T S.E. 440 Six Pack
1970 Challenger R/T, 528 Hemi
1970 Charger 500 S.E. 440 4 BBL
1970 Plymouth Road Runner 383
1974 Chrysler New Yorker 440
1996 2500 RAM 488 V-10 4X4
2004 3500 Dually Cummins 4x4
2012 Challenger R/T Classic.