I suspect the orientation of the pushrod to the mounting point on the pedal arm is different between the two bc the mounting point on my pedal arm doesn’t line up so I had to do some fabricating to get it to even work. It’s not right. It’s like two inches above the hole in the pedal arm and about three inches away from
It. I knew it wasn’t right but until now I didn’t know what was wrong.
I think I can make it work if I can set the plunger right according to the instructions I have been given here.
What RR mentioned has nothing to do with what we are talking about. See picture for what your linkage from the pedal tot eh booster is supposed to look like.
What RR is talking about adjusting is the pushrod from the booster to the master cylinder.
