CNC porting iron heads.

Print Thread

Re: CNC porting iron heads. [Re: 411Dude] #2346103 07/31/17 10:13 AM 07/31/17 10:13 AM
Joined: Oct 2011 Posts: 559 Idaho L LaRoy Engines mopar
LaRoy Engines mopar L Joined: Oct 2011 Posts: 559 Idaho	The probability of a CNC program for iron Max Wedge is small and the probability of it being better than a hand ported set done by an accomplished porter is even smaller.

Entire Thread
Subject	Posted By	Posted
CNC porting iron heads.	411Dude	07/30/17 11:51 PM
Re: CNC porting iron heads.	PorkyPig	07/31/17 12:52 AM
Re: CNC porting iron heads.	mopar65	07/31/17 12:54 AM
Re: CNC porting iron heads.	MR_P_BODY	07/31/17 01:14 AM
Re: CNC porting iron heads.	mopar65	07/31/17 02:20 AM
Re: CNC porting iron heads.	70AARcuda	07/31/17 01:28 AM
Re: CNC porting iron heads.	1DGEMAN	07/31/17 02:21 AM
Re: CNC porting iron heads.	mr_340	07/31/17 04:59 AM
Re: CNC porting iron heads.	Ian	07/31/17 09:46 AM
Re: CNC porting iron heads.	mr_340	08/04/17 05:01 AM
Re: CNC porting iron heads.	LaRoy Engines	07/31/17 02:13 PM
Re: CNC porting iron heads.	370hemi	07/31/17 03:06 PM
Re: CNC porting iron heads.	mopar65	07/31/17 04:34 PM
Re: CNC porting iron heads.	Cab_Burge	07/31/17 07:41 PM
Re: CNC porting iron heads.	BradH	07/31/17 11:27 PM
Re: CNC porting iron heads.	mopar65	08/01/17 02:27 PM
Re: CNC porting iron heads.	fast68plymouth	07/31/17 04:13 PM
Re: CNC porting iron heads.	370hemi	07/31/17 02:59 PM
Re: CNC porting iron heads.	polyspheric	07/31/17 03:22 PM
Re: CNC porting iron heads.	fast68plymouth	07/31/17 07:53 PM
Re: CNC porting iron heads.	Anonymous	07/31/17 08:10 PM
Re: CNC porting iron heads.	370hemi	07/31/17 08:35 PM
Re: CNC porting iron heads.	fast68plymouth	07/31/17 10:47 PM
Re: CNC porting iron heads.	fast68plymouth	08/01/17 05:12 AM
Re: CNC porting iron heads.	an8sec70cuda	08/01/17 02:16 PM
Re: CNC porting iron heads.	fast68plymouth	08/01/17 04:27 PM
Re: CNC porting iron heads.	HardcoreB	08/06/17 04:27 AM
Re: CNC porting iron heads.	pittsburghracer	08/01/17 04:36 PM
Re: CNC porting iron heads.	fast68plymouth	08/01/17 04:41 PM
Re: CNC porting iron heads.	pittsburghracer	08/01/17 04:54 PM
Re: CNC porting iron heads.	LA360	08/02/17 10:20 AM
Re: CNC porting iron heads.	polyspheric	08/02/17 04:57 PM
Re: CNC porting iron heads.	fast68plymouth	08/06/17 05:10 AM
Re: CNC porting iron heads.	411Dude	08/06/17 11:49 PM
Re: CNC porting iron heads.	Bob J	08/07/17 12:38 AM
Re: CNC porting iron heads.	Cab_Burge	08/07/17 03:57 AM
Re: CNC porting iron heads.	mr_340	08/08/17 01:04 AM
Re: CNC porting iron heads.	AndyF	08/08/17 02:17 AM
Re: CNC porting iron heads.	Gtxxjon	10/17/21 03:21 PM
Re: CNC porting iron heads.	fast68plymouth	10/17/21 09:52 PM
Re: CNC porting iron heads.	Max Weg	10/18/21 10:42 AM
Re: CNC porting iron heads.	cudaman1969	10/19/21 01:03 AM
Re: CNC porting iron heads.	Gtxxjon	10/19/21 08:33 AM
Re: CNC porting iron heads.	Gtxxjon	10/19/21 01:53 PM
Re: CNC porting iron heads.	CSK	10/19/21 02:39 PM
Re: CNC porting iron heads.	fast68plymouth	10/19/21 03:17 PM
Re: CNC porting iron heads.	Chargerfan68	10/19/21 10:07 PM
Re: CNC porting iron heads.	fast68plymouth	10/19/21 10:38 PM
Re: CNC porting iron heads.	Max Weg	10/21/21 10:19 AM
Re: CNC porting iron heads.	ChrgrCuda	10/21/21 11:31 AM
Re: CNC porting iron heads.	Max Weg	10/21/21 11:35 AM
Re: CNC porting iron heads.	A727Tflite	10/21/21 12:48 PM
Re: CNC porting iron heads.	Gtxxjon	10/21/21 01:33 PM
Re: CNC porting iron heads.	Gtxxjon	10/21/21 01:38 PM
Re: CNC porting iron heads.	Gtxxjon	10/21/21 01:52 PM
Re: CNC porting iron heads.	Gtxxjon	10/21/21 02:02 PM
Re: CNC porting iron heads.	Gtxxjon	10/21/21 02:40 PM
Re: CNC porting iron heads.	fast68plymouth	10/21/21 02:41 PM
Re: CNC porting iron heads.	Gtxxjon	10/21/21 02:50 PM
Re: CNC porting iron heads.	ChrgrCuda	10/21/21 02:51 PM
Re: CNC porting iron heads.	Gtxxjon	10/21/21 02:54 PM
Re: CNC porting iron heads.	cudaman1969	10/21/21 08:09 PM
Re: CNC porting iron heads.	poboyengineering	10/21/21 09:19 PM
Re: CNC porting iron heads.	Gtxxjon	10/22/21 10:14 AM
Re: CNC porting iron heads.	HotRodDave	10/22/21 04:57 PM
Re: CNC porting iron heads.	A727Tflite	10/22/21 05:15 PM
Re: CNC porting iron heads.	Gtxxjon	10/23/21 09:11 AM
Re: CNC porting iron heads.	CSK	08/07/17 12:45 AM
Re: CNC porting iron heads.	dwayne welder	08/07/17 09:05 PM
Re: CNC porting iron heads.	HotRodDave	08/07/17 11:27 PM
Re: CNC porting iron heads.	sasquatch	08/07/17 11:53 PM
Re: CNC porting iron heads.	MR_P_BODY	08/08/17 12:12 AM
Re: CNC porting iron heads.	ZIPPY	10/19/21 02:08 PM
Re: CNC porting iron heads.	Gtxxjon	10/19/21 02:23 PM
Re: CNC porting iron heads.	Gtxxjon	10/19/21 02:27 PM
Re: CNC porting iron heads.	polyspheric	10/19/21 10:38 PM
Re: CNC porting iron heads.	cudaman1969	10/20/21 01:14 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To