actually if you are on TDC #1 compression (15 is far better) with the magnet lined up & with the wires clocked CCW from there starting with #1 of course it will run (with RP in the ballpark) & that might be a good simple plan just to hear that puppy roar to life & reclocking the intergear (if needed) takes a bit of time but haveing the wires routed correct lets em lay the neatest with the shortest lengths possible (more so on a SB) but every little bit helps & helps prevent future mistakes. On RP some dists have vastly different top rotor to bottom lower metal tang clocking so you do want to check it (where it is at at rest).