don't post much anymore, but
Not many guys are pushing the stock block. Too many say it won't take anything past 600hp.
That may be the case but we ran stock block over 10 years and several of those years we leaned on the nitrous pretty hard pushing car 138-40 in 1/8th. We are retiring it now and building a r3 with w9rp's for the duster. I will however be putting a new set of Pistons in it and have it fresh just in case the new build has any problems.
What heads and compression with that mph?
My half filled, non studded, 360 base 4" stroke motor with 360-2 CNCS is currently running a .63 jet through a cheater on pump gas. Would loveeee to build an r3 for it or one of the G3 hemi's I have sitting on the garage floor, but im tight on cash and want to throw a much bigger hit at the stock block...Hoping it will hold, but I need to build a 727 or glide first and get a proper converter, my 904 has a vert that is total crap
