500 inch Mopar Build - Which intake to go with?

Print Thread

Re: 500 inch Mopar Build - Which intake to go with? [Re: D200] #197992 01/20/09 09:27 PM 01/20/09 09:27 PM
Joined: May 2007 Posts: 102 richmond indiana I ichsam member
ichsam member I Joined: May 2007 Posts: 102 richmond indiana	the Indy 440-2d works good on the 500 inch , low profile at only 5.25 inches , will bolt on your stealth heads & you can open the same intake up to the max wedge size in the future if needed

Entire Thread
Subject	Posted By	Posted
500 inch Mopar Build - Which intake to go with?	D200	01/19/09 04:08 PM
Re: 500 inch Mopar Build - Which intake to go with?	Anonymous	01/19/09 04:19 PM
Re: 500 inch Mopar Build - Which intake to go with?	MR_P_BODY	01/19/09 04:27 PM
Re: 500 inch Mopar Build - Which intake to go with?	cudarex	01/19/09 05:25 PM
Re: 500 inch Mopar Build - Which intake to go with?	gch	01/19/09 05:36 PM
Re: 500 inch Mopar Build - Which intake to go with?	QWK_ENUF	01/19/09 06:04 PM
Re: 500 inch Mopar Build - Which intake to go with?	Dragula	01/19/09 06:20 PM
Re: 500 inch Mopar Build - Which intake to go with?	AndyF	01/19/09 07:05 PM
Re: 500 inch Mopar Build - Which intake to go with?	AndyF	01/19/09 07:08 PM
Re: 500 inch Mopar Build - Which intake to go with?	dthemi	01/27/09 02:25 AM
Re: 500 inch Mopar Build - Which intake to go with?	BDS871Cuda	01/19/09 07:19 PM
Re: 500 inch Mopar Build - Which intake to go with?	oldiron	01/19/09 08:54 PM
Re: 500 inch Mopar Build - Which intake to go with?	Bob_Coomer	01/19/09 09:10 PM
Re: 500 inch Mopar Build - Which intake to go with?	Dodgem	01/19/09 09:48 PM
Re: 500 inch Mopar Build - Which intake to go with?	BSB67	01/20/09 12:49 AM
Re: 500 inch Mopar Build - Which intake to go with?	Bob_Coomer	01/20/09 12:56 AM
Re: 500 inch Mopar Build - Which intake to go with?	Streetwize	01/20/09 03:07 AM
Re: 500 inch Mopar Build - Which intake to go with?	RedRam	01/20/09 03:17 AM
Re: 500 inch Mopar Build - Which intake to go with?	B1Fish540	01/20/09 06:08 AM
Re: 500 inch Mopar Build - Which intake to go with?	Dodgem	01/20/09 02:09 PM
Re: 500 inch Mopar Build - Which intake to go with?	Joshs68	01/20/09 03:12 PM
Re: 500 inch Mopar Build - Which intake to go with?	cirrusaero	01/20/09 03:39 PM
Re: 500 inch Mopar Build - Which intake to go with?	Cab_Burge	01/20/09 05:56 PM
Re: 500 inch Mopar Build - Which intake to go with?	ichsam	01/21/09 01:27 AM
Re: 500 inch Mopar Build - Which intake to go with?	AndyF	01/21/09 02:42 AM
Re: 500 inch Mopar Build - Which intake to go with?	Streetwize	01/21/09 03:06 AM
Re: 500 inch Mopar Build - Which intake to go with?	300by500	01/21/09 03:22 AM
Re: 500 inch Mopar Build - Which intake to go with?	300by500	01/21/09 03:26 AM
Re: 500 inch Mopar Build - Which intake to go with?	Joshs68	01/22/09 02:01 AM
Re: 500 inch Mopar Build - Which intake to go with?	DonnieLawson	01/27/09 01:44 AM
Re: 500 inch Mopar Build - Which intake to go with?	moparniac	01/27/09 02:18 AM
Re: 500 inch Mopar Build - Which intake to go with?	preddy	01/27/09 02:36 AM
Re: 500 inch Mopar Build - Which intake to go with?	DonnieLawson	01/27/09 03:04 AM
Re: 500 inch Mopar Build - Which intake to go with?	preddy	01/27/09 05:02 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To