My Firm Feel kit did not bolt to the K frame without binding the bearing, I had to massage the mounting tabs a bit to accomplish keeping the bearing free.
This is probably the result of the loose QC of 45 year old cars, but keep that in mind when you tighten the two tabs.
Joe
I "adjusted" the lip on the K-frame on mine with a very large pair of channel lock pliers to get the angle to match the bearing mounting plate so there would be no binding.
Michael
1968 Barracuda Notchback Coupe
440 EFI 6-pack, T56 Magnum 6-spd
