drill speed when performing oil mods

Print Thread

Re: drill speed when performing oil mods [Re: pittsburghracer] #1824080 05/11/15 12:20 PM 05/11/15 12:20 PM
Joined: Jan 2007 Posts: 8,043 Mt Morris Michigan mopar dave OP master
mopar dave OP master Joined: Jan 2007 Posts: 8,043 Mt Morris Michigan	going to block drivers galley at 1 main, but will not be tubing pass. side. opening up main galleys as well as the 1/2" galleys. that's it. http://www.youtube.com/watch?v=aIxaesJ190U http://youtu.be/lCZAaN7fFLg

Entire Thread
Subject	Posted By	Posted
drill speed when performing oil mods	mopar dave	05/10/15 06:03 AM
Re: drill speed when performing oil mods	ademon	05/10/15 07:16 AM
Re: drill speed when performing oil mods	NEVjr	05/10/15 07:28 AM
Re: drill speed when performing oil mods	MR_P_BODY	05/10/15 02:47 PM
Re: drill speed when performing oil mods	mopar dave	05/10/15 03:41 PM
Re: drill speed when performing oil mods	mopar dave	05/10/15 03:42 PM
Re: drill speed when performing oil mods	BSB67	05/11/15 02:52 AM
Re: drill speed when performing oil mods	NEVjr	05/11/15 03:33 AM
Re: drill speed when performing oil mods	Stanton	05/11/15 03:29 PM
Re: drill speed when performing oil mods	mopar dave	05/11/15 03:45 PM
Re: drill speed when performing oil mods	pittsburghracer	05/11/15 03:59 PM
Re: drill speed when performing oil mods	mopar dave	05/11/15 04:20 PM

Hop To