drill speed when performing oil mods

Print Thread

Re: drill speed when performing oil mods [Re: mopar dave] #1823279 05/10/15 10:47 AM 05/10/15 10:47 AM
Joined: Jun 2003 Posts: 52,972 Romeo MI MR_P_BODY Master
MR_P_BODY Master Joined: Jun 2003 Posts: 52,972 Romeo MI	I dull down the bit slightly.. that way it wont try to bite.. when the bite bites is when they break.. also.. iron cuts easy thats why they tend to bite

Entire Thread
Subject	Posted By	Posted
drill speed when performing oil mods	mopar dave	05/10/15 06:03 AM
Re: drill speed when performing oil mods	ademon	05/10/15 07:16 AM
Re: drill speed when performing oil mods	NEVjr	05/10/15 07:28 AM
Re: drill speed when performing oil mods	MR_P_BODY	05/10/15 02:47 PM
Re: drill speed when performing oil mods	mopar dave	05/10/15 03:41 PM
Re: drill speed when performing oil mods	mopar dave	05/10/15 03:42 PM
Re: drill speed when performing oil mods	BSB67	05/11/15 02:52 AM
Re: drill speed when performing oil mods	NEVjr	05/11/15 03:33 AM
Re: drill speed when performing oil mods	Stanton	05/11/15 03:29 PM
Re: drill speed when performing oil mods	mopar dave	05/11/15 03:45 PM
Re: drill speed when performing oil mods	pittsburghracer	05/11/15 03:59 PM
Re: drill speed when performing oil mods	mopar dave	05/11/15 04:20 PM

Hop To