drill speed when performing oil mods

Print Thread

Re: drill speed when performing oil mods [Re: mopar dave] #1823749 05/10/15 10:52 PM 05/10/15 10:52 PM
Joined: Feb 2005 Posts: 4,324 Prospect, PA BSB67 master
BSB67 master Joined: Feb 2005 Posts: 4,324 Prospect, PA	9/32" drill and some WD-40. Don't know the rpm, just use what felt right. It drills pretty easy. Last edited by BSB67; 05/10/15 10:53 PM.

Entire Thread
Subject	Posted By	Posted
drill speed when performing oil mods	mopar dave	05/10/15 06:03 AM
Re: drill speed when performing oil mods	ademon	05/10/15 07:16 AM
Re: drill speed when performing oil mods	NEVjr	05/10/15 07:28 AM
Re: drill speed when performing oil mods	MR_P_BODY	05/10/15 02:47 PM
Re: drill speed when performing oil mods	mopar dave	05/10/15 03:41 PM
Re: drill speed when performing oil mods	mopar dave	05/10/15 03:42 PM
Re: drill speed when performing oil mods	BSB67	05/11/15 02:52 AM
Re: drill speed when performing oil mods	NEVjr	05/11/15 03:33 AM
Re: drill speed when performing oil mods	Stanton	05/11/15 03:29 PM
Re: drill speed when performing oil mods	mopar dave	05/11/15 03:45 PM
Re: drill speed when performing oil mods	pittsburghracer	05/11/15 03:59 PM
Re: drill speed when performing oil mods	mopar dave	05/11/15 04:20 PM

Hop To