Quote:

all stock wiring. Any ideas where to look?
Is it possible to install the petronix kit into an ELECTRONIC distributor like you can a points unit so i can do away with all the factory crap?


Clean all the terminals on the firewall bulkhead (male terminal NAPA 725147) to clean the female halves and a wire brush for the male ones & koppercoat for continuity/dielectric grease to seal em away from air then as needed check running voltage drops at every terminal/connection or just clean em ALL from battery in/thru bulkhead/under dash connections/out thru bulkhead. Check/clean ground path also. EDIT For a chemical to aid in cleaning reportedly "Deoxit" is VG for cleaning terminals (I'm gonna try it). Not sure who sells it but it'd be easy to find out

Last edited by RapidRobert; 10/15/14 11:21 AM.
live every 24 hour block of time like it's your last day on earth