Quote:

Not sure what you mean...
"If it were me I would take the .010 out of the open part of the chamber that way you end up with perfectly matched chamber depths and add CC to the chambers."
Are you referring to grinding back the open part of the chambers to the edge of the head gasket?


I am in Marlborough, MA btw.



I screwed up, I was thinking you needed to make the open part of the chamber deeper, not shallower. What I have done in the past wouldn't help you.

But yes scribe the head gasket opening onto the head and grind it back to that to gain chamber volume.

I like the idea of using the thinner gasket that way if you have to cut the heads again you can just use the thicker gasket and still be safe.