Quote:

Install the carrier and the axles and set the bearing end play. Make sure you pack the axle bearings as these are not lubed by the gear oil. Once you get it all buttoned up, pull the fill plug and fill it up. Should take about 2 1/4 quarts. 80W/90 will work fine. Add Limited slip additive if its a sure grip. Done!!




My friend already packed the axle bearings but I'm going to add a little more. I also just bought a gallon of 80W/90 and the limited slip additive. It's a true trac diff. Not the clutch type.

As for the axle end play. Since I'm not using the drum brake backing plates and I don't have dial indicators, do I just try to get the axle as close to zero end play as possible?