Again just focusing on the passenger side door, went out and took a pic.

Originally, "A" plugged into "B" which led to the window motor. "C" plugs into the window switch.

The solid pink, purple and yellow wires fed through the door opening into the factory window wiring harness.

I have Pin 30 from each relay going to plug "B" which go directly to the motor.

I have Pin 86 from each relay going to the solid pink and purple wires going to the switch.

I have Pin 87 from each relay going to the hot terminal on the starter (fused).

I have Pin 85 and 87a on each relay going to a ring terminal and bolted to the metal door frame.

I have the yellow wire from the switch going to nothing.

I have "A" unplugged.

(Nevermind all of the orange electrical tape... that's my reminder of what to go back and wrap properly when the system works.)

Thanks guys!

Darren