Ok, so apparently those brackets/bushings are stock replacements? and appear to only be available in 7/8" and 15/16".

So, I'm going to play around with the LCA bracket and end link length. If I don't get anywhere with that I'll see about getting a set of the Energy Suspension bushings/brackets. I really only need the brackets though, so might just try to make my own.

Will also, get to work installing the rear bar. I'm hoping it goes a little better than the front.

As far as the brakes, I'm going to see if I can remove the rubber part of the caliper that hits first on the shocks, and see if the actual bolts inside hit, and go from there.

As for the steering, I'll keep adjusting till I can't anymore, and if so just go with a FF2 or FF3.

Thanks guys. I'll keep you posted on how things go.

BTW, no, my car didn't originally have a bar. I'm using the complete Addco setup.