Quote:

The pipes seperate/slip on at the fender so I just remove one and replace it with the other with a collector end that I have to redo so a muffler can fit.I need to run a strap on the pipes to hold them togather on the lower part and support them also.Any ideas?



If you can weld a strap across the 4 tubes then attach
a hanger at that point... then when you change to a
collector you might be a bile to attach at that same
point with the hanger... I use a certain style of
hanger with a rod and rubber block.. this has more
fore and aft movement than sideways which all exhaust
grown in length... of course you have to mount it
in the direction of growth... this one isnt attached
at this time to the pipe