Yes a stock 59* block with -1 heads. I'm running the 360-1 245 cnc heads on my magnum block with T&D 1.7 shaft rockers and comp offset lifters. I had to grind the block to fit them, well I didn't grind enough apparently and broke two link bars from wedging into the block.




Deputy

2000 Dakota R/T, 408 magnum, 727, Indy heads
1000cfm 4150 carb, 93 octane fuel.
motor; 10.258 @ 132.78
200 shot; 9.262 @ 144.69
racemagnum