Thanks for the input. I went through everything, cleaned the connectors and put everything back the way it was supposed to be. The ASD code is gone but I'm getting code 11. Looked it up and that one sounds like a code for a crankshaft position sensor.

I checked the crank sensor wires. With the sensor unplugged, I get 5v, 7.4v and ground. With the sensor plugged in the 5v drops to 2.4v and it does not seem to pulse when the engine is cranked over. I only have a digital multimeter but it does have a min/max function and it wasn't showing any changes while cranking. Time to try a different crank sensor I guess.