Charger with 440 won't pull and rev enough?

Print Thread

Re: Charger with 440 won't pull and rev enough? [Re: AutoEngineer] #1236066 05/20/12 07:07 PM 05/20/12 07:07 PM
Joined: Mar 2009 Posts: 2,460 Sydney,Australia tex013 top fuel
tex013 top fuel Joined: Mar 2009 Posts: 2,460 Sydney,Australia	looking at your jets seem a little low to me. in comparison my 440+0.055 with a M1 plus 1" open spacer and 825 mighty demon is jetted F78,R92 and when i run a Prosystems 1000HP Holley based carb is F84,R92 i do race with an air plate sealed to a six pack scoop motor is 10.78:1,258/258 solid flat tappet 3/8 line for my motor was good with a holley black 150 pump to mid 11.3's then needed -8 lines good luck Tex New best ET 10.259@129.65 . New best MPH 130.32 Finally fitted a solid cam, stepped it up a bit more 3690lbs through the mufflers New World block 3780lbs 10.278@130.80 . Wowser 10.253@130.24 footbraking from 1500rpm Power by Tex's Automotive

Entire Thread
Subject	Posted By	Posted
Charger with 440 won't pull and rev enough?	AutoEngineer	05/19/12 10:20 PM
Re: Charger with 440 won't pull and rev enough?	Dodgem	05/19/12 11:03 PM
Re: Charger with 440 won't pull and rev enough?	Streetwize	05/20/12 12:35 AM
Re: Charger with 440 won't pull and rev enough?	Exit1965	05/20/12 01:41 AM
Re: Charger with 440 won't pull and rev enough?	10sec440	05/20/12 02:38 AM
Re: Charger with 440 won't pull and rev enough?	JAKE68	05/20/12 03:09 AM
Re: Charger with 440 won't pull and rev enough?	Joshs68	05/20/12 03:44 AM
Re: Charger with 440 won't pull and rev enough?	blue_stocker	05/20/12 08:45 AM
Re: Charger with 440 won't pull and rev enough?	JAKE68	05/20/12 11:45 AM
Re: Charger with 440 won't pull and rev enough?	10sec440	05/20/12 05:59 PM
Re: Charger with 440 won't pull and rev enough?	AutoEngineer	05/20/12 08:33 PM
Re: Charger with 440 won't pull and rev enough?	BSB67	05/20/12 09:04 PM
Re: Charger with 440 won't pull and rev enough?	tex013	05/20/12 11:07 PM
Re: Charger with 440 won't pull and rev enough?	imfixinmopars426	05/21/12 01:09 AM
Re: Charger with 440 won't pull and rev enough?	JAKE68	05/21/12 03:23 AM
Re: Charger with 440 won't pull and rev enough?	Red440	05/21/12 04:36 AM
Re: Charger with 440 won't pull and rev enough?	ZIPPY	05/21/12 03:54 PM
Re: Charger with 440 won't pull and rev enough?	JAKE68	05/21/12 04:02 PM
Re: Charger with 440 won't pull and rev enough?	AutoEngineer	05/21/12 05:13 PM
Re: Charger with 440 won't pull and rev enough?	Mr.Yuck	05/21/12 05:54 PM
Re: Charger with 440 won't pull and rev enough?	AutoEngineer	05/21/12 06:29 PM
Re: Charger with 440 won't pull and rev enough?	Streetwize	05/21/12 07:40 PM
Re: Charger with 440 won't pull and rev enough?	Cab_Burge	05/21/12 07:43 PM
Re: Charger with 440 won't pull and rev enough?	AutoEngineer	05/22/12 05:37 PM
Re: Charger with 440 won't pull and rev enough?	Cab_Burge	05/22/12 06:33 PM
Re: Charger with 440 won't pull and rev enough?	Dodgem	05/22/12 08:17 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To