Is .002" rod bearing clearance to tight ?

Print Thread

Re: Is .002" rod bearing clearance to tight ? [Re: MR_P_BODY] #1222464 04/26/12 12:04 PM 04/26/12 12:04 PM
Joined: Feb 2007 Posts: 5,080 organ M maximum entropy master
maximum entropy master M Joined: Feb 2007 Posts: 5,080 organ	Quote: There is a rule of thumb for clearance... its something like .001 per every inch of diameter (dont quote me on that number... I forget what it is) what's your rod journal diameter? for what is the good life if not doing things thoughtfully?

Entire Thread
Subject	Posted By	Posted
Is .002" rod bearing clearance to tight ?	rlm2268	04/26/12 06:32 AM
Re: Is .002" rod bearing clearance to tight ?	cudabin	04/26/12 06:40 AM
Re: Is .002" rod bearing clearance to tight ?	Twin Turbo Mower	04/26/12 08:24 AM
Re: Is .002" rod bearing clearance to tight ?	MR_P_BODY	04/26/12 01:44 PM
Re: Is .002" rod bearing clearance to tight ?	Moparnut426	04/26/12 01:49 PM
Re: Is .002" rod bearing clearance to tight ?	rlm2268	04/26/12 01:54 PM
Re: Is .002" rod bearing clearance to tight ?	MR_P_BODY	04/26/12 02:00 PM
Re: Is .002" rod bearing clearance to tight ?	rickseeman	04/26/12 02:09 PM
Re: Is .002" rod bearing clearance to tight ?	maximum entropy	04/26/12 04:04 PM
Re: Is .002" rod bearing clearance to tight ?	DJVCuda	04/26/12 02:23 PM
Re: Is .002" rod bearing clearance to tight ?	BradH	04/26/12 04:54 PM
Re: Is .002" rod bearing clearance to tight ?	66er	04/26/12 05:05 PM
Re: Is .002" rod bearing clearance to tight ?	Cab_Burge	04/26/12 05:17 PM
Re: Is .002" rod bearing clearance to tight ?	66er	04/26/12 05:25 PM
Re: Is .002" rod bearing clearance to tight ?	rlm2268	04/27/12 02:52 AM
Re: Is .002" rod bearing clearance to tight ?	Cab_Burge	04/27/12 03:57 AM
Re: Is .002" rod bearing clearance to tight ?	rlm2268	04/27/12 04:13 AM
Re: Is .002" rod bearing clearance to tight ?	66er	04/27/12 03:48 PM
Re: Is .002" rod bearing clearance to tight ?	rlm2268	04/27/12 05:02 PM
Re: Is .002" rod bearing clearance to tight ?	8urvette	04/27/12 05:17 PM
Re: Is .002" rod bearing clearance to tight ?	cudatom	02/22/19 06:25 PM
Re: Is .002" rod bearing clearance to tight ?	BradH	04/27/12 03:26 PM
Re: Is .002" rod bearing clearance to tight ?	gregsdart	02/21/19 07:21 PM
Re: Is .002" rod bearing clearance to tight ?	CMcAllister	02/21/19 07:33 PM
Re: Is .002" rod bearing clearance to tight ?	lewtot184	02/21/19 07:46 PM
Re: Is .002" rod bearing clearance to tight ?	Cab_Burge	02/22/19 02:35 AM
Re: Is .002" rod bearing clearance to tight ?	dvw	02/21/19 09:19 PM
Re: Is .002" rod bearing clearance to tight ?	dthemi	02/22/19 01:52 AM
Re: Is .002" rod bearing clearance to tight ?	BobR	02/22/19 10:14 PM
Re: Is .002" rod bearing clearance to tight ?	merpar	02/22/19 02:56 AM
Re: Is .002" rod bearing clearance to tight ?	moparx	02/22/19 06:19 PM
Re: Is .002" rod bearing clearance to tight ?	451Mopar	02/22/19 06:53 AM
Re: Is .002" rod bearing clearance to tight ?	fastmark	02/22/19 03:11 PM
Re: Is .002" rod bearing clearance to tight ?	polyspheric	02/22/19 04:01 PM
Re: Is .002" rod bearing clearance to tight ?	CMcAllister	02/22/19 07:45 PM
Re: Is .002" rod bearing clearance to tight ?	Cab_Burge	02/22/19 10:09 PM
Re: Is .002" rod bearing clearance to tight ?	mopar dave	02/23/19 05:03 AM
Re: Is .002" rod bearing clearance to tight ?	polyspheric	02/23/19 05:11 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To