Is .002" rod bearing clearance to tight ?

Print Thread

Re: Is .002" rod bearing clearance to tight ? [Re: rlm2268] #1222457 04/26/12 04:24 AM 04/26/12 04:24 AM
Joined: Apr 2004 Posts: 1,056 Mt.Vernon IL Twin Turbo Mower super stock
Twin Turbo Mower super stock Joined: Apr 2004 Posts: 1,056 Mt.Vernon IL	Quote: Do You think .002" rod bearing clearance is to tight for a street strip type 500" motor turning 6500-6800 rpm. Or should I try and get another bearing set in .001 looser and use half the set or the whole set to try to get it .0025"-.003" p.s my bearings are clevite CB-527 HD . Yes too tight buy the .001 loser and you will be fine. My friend did the same thing been running his 511 for 3 years now.

Entire Thread
Subject	Posted By	Posted
Is .002" rod bearing clearance to tight ?	rlm2268	04/26/12 06:32 AM
Re: Is .002" rod bearing clearance to tight ?	cudabin	04/26/12 06:40 AM
Re: Is .002" rod bearing clearance to tight ?	Twin Turbo Mower	04/26/12 08:24 AM
Re: Is .002" rod bearing clearance to tight ?	MR_P_BODY	04/26/12 01:44 PM
Re: Is .002" rod bearing clearance to tight ?	Moparnut426	04/26/12 01:49 PM
Re: Is .002" rod bearing clearance to tight ?	rlm2268	04/26/12 01:54 PM
Re: Is .002" rod bearing clearance to tight ?	MR_P_BODY	04/26/12 02:00 PM
Re: Is .002" rod bearing clearance to tight ?	rickseeman	04/26/12 02:09 PM
Re: Is .002" rod bearing clearance to tight ?	maximum entropy	04/26/12 04:04 PM
Re: Is .002" rod bearing clearance to tight ?	DJVCuda	04/26/12 02:23 PM
Re: Is .002" rod bearing clearance to tight ?	BradH	04/26/12 04:54 PM
Re: Is .002" rod bearing clearance to tight ?	66er	04/26/12 05:05 PM
Re: Is .002" rod bearing clearance to tight ?	Cab_Burge	04/26/12 05:17 PM
Re: Is .002" rod bearing clearance to tight ?	66er	04/26/12 05:25 PM
Re: Is .002" rod bearing clearance to tight ?	rlm2268	04/27/12 02:52 AM
Re: Is .002" rod bearing clearance to tight ?	Cab_Burge	04/27/12 03:57 AM
Re: Is .002" rod bearing clearance to tight ?	rlm2268	04/27/12 04:13 AM
Re: Is .002" rod bearing clearance to tight ?	66er	04/27/12 03:48 PM
Re: Is .002" rod bearing clearance to tight ?	rlm2268	04/27/12 05:02 PM
Re: Is .002" rod bearing clearance to tight ?	8urvette	04/27/12 05:17 PM
Re: Is .002" rod bearing clearance to tight ?	cudatom	02/22/19 06:25 PM
Re: Is .002" rod bearing clearance to tight ?	BradH	04/27/12 03:26 PM
Re: Is .002" rod bearing clearance to tight ?	gregsdart	02/21/19 07:21 PM
Re: Is .002" rod bearing clearance to tight ?	CMcAllister	02/21/19 07:33 PM
Re: Is .002" rod bearing clearance to tight ?	lewtot184	02/21/19 07:46 PM
Re: Is .002" rod bearing clearance to tight ?	Cab_Burge	02/22/19 02:35 AM
Re: Is .002" rod bearing clearance to tight ?	dvw	02/21/19 09:19 PM
Re: Is .002" rod bearing clearance to tight ?	dthemi	02/22/19 01:52 AM
Re: Is .002" rod bearing clearance to tight ?	BobR	02/22/19 10:14 PM
Re: Is .002" rod bearing clearance to tight ?	merpar	02/22/19 02:56 AM
Re: Is .002" rod bearing clearance to tight ?	moparx	02/22/19 06:19 PM
Re: Is .002" rod bearing clearance to tight ?	451Mopar	02/22/19 06:53 AM
Re: Is .002" rod bearing clearance to tight ?	fastmark	02/22/19 03:11 PM
Re: Is .002" rod bearing clearance to tight ?	polyspheric	02/22/19 04:01 PM
Re: Is .002" rod bearing clearance to tight ?	CMcAllister	02/22/19 07:45 PM
Re: Is .002" rod bearing clearance to tight ?	Cab_Burge	02/22/19 10:09 PM
Re: Is .002" rod bearing clearance to tight ?	mopar dave	02/23/19 05:03 AM
Re: Is .002" rod bearing clearance to tight ?	polyspheric	02/23/19 05:11 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To