Solid roller lobe selection for power or durability

Print Thread

Re: Solid roller lobe selection for power or durability [Re: turbobitt] #1161501 01/21/12 04:30 AM 01/21/12 04:30 AM
Joined: Jan 2011 Posts: 4,785 Utah and Alaska astjp2 master
astjp2 master Joined: Jan 2011 Posts: 4,785 Utah and Alaska	I am running a crane roller in my hemi that has 248@.050 and a .400 lift, also using it with pushrod oiling. Tim

Entire Thread
Subject	Posted By	Posted
Solid roller lobe selection for power or durability	turbobitt	01/20/12 09:50 PM
Re: Solid roller lobe selection for power or durability	Von	01/20/12 10:37 PM
Re: Solid roller lobe selection for power or durability	turbobitt	01/21/12 12:38 AM
Re: Solid roller lobe selection for power or durability	BSB67	01/20/12 10:52 PM
Re: Solid roller lobe selection for power or durability	turbobitt	01/21/12 12:36 AM
Re: Solid roller lobe selection for power or durability	Brian Hafliger	01/21/12 01:18 AM
Re: Solid roller lobe selection for power or durability	turbobitt	01/21/12 02:17 AM
Re: Solid roller lobe selection for power or durability	Brian Hafliger	01/21/12 03:13 AM
Re: Solid roller lobe selection for power or durability	turbobitt	01/21/12 06:36 AM
Re: Solid roller lobe selection for power or durability	astjp2	01/21/12 08:30 AM
Re: Solid roller lobe selection for power or durability	451Mopar	01/21/12 07:11 PM
Re: Solid roller lobe selection for power or durability	emarine01	01/21/12 08:31 PM

Hop To