Solid roller lobe selection for power or durability

Print Thread

Re: Solid roller lobe selection for power or durability [Re: turbobitt] #1161494 01/20/12 06:52 PM 01/20/12 06:52 PM
Joined: Feb 2005 Posts: 4,316 Prospect, PA BSB67 master
BSB67 master Joined: Feb 2005 Posts: 4,316 Prospect, PA	the -5 is a lot easier on parts than the othere two, but they start at 248 @ 0.050"

Entire Thread
Subject	Posted By	Posted
Solid roller lobe selection for power or durability	turbobitt	01/20/12 09:50 PM
Re: Solid roller lobe selection for power or durability	Von	01/20/12 10:37 PM
Re: Solid roller lobe selection for power or durability	turbobitt	01/21/12 12:38 AM
Re: Solid roller lobe selection for power or durability	BSB67	01/20/12 10:52 PM
Re: Solid roller lobe selection for power or durability	turbobitt	01/21/12 12:36 AM
Re: Solid roller lobe selection for power or durability	Brian Hafliger	01/21/12 01:18 AM
Re: Solid roller lobe selection for power or durability	turbobitt	01/21/12 02:17 AM
Re: Solid roller lobe selection for power or durability	Brian Hafliger	01/21/12 03:13 AM
Re: Solid roller lobe selection for power or durability	turbobitt	01/21/12 06:36 AM
Re: Solid roller lobe selection for power or durability	astjp2	01/21/12 08:30 AM
Re: Solid roller lobe selection for power or durability	451Mopar	01/21/12 07:11 PM
Re: Solid roller lobe selection for power or durability	emarine01	01/21/12 08:31 PM

Hop To