Help on 440 build - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Help on 440 build

Print Thread

Re: Help on 440 build [Re: jamesc] #1148288 01/02/12 12:03 AM 01/02/12 12:03 AM
Joined: Dec 2004 Posts: 10,555 Rittman Ohio fourgearsavoy I Live Here
fourgearsavoy I Live Here Joined: Dec 2004 Posts: 10,555 Rittman Ohio	I'm with Bill on the Wiseco Pro-Tru pistons I have them in my engine with K-1 rods with the 990 pins.My engine is right at 11.1 with flattops and and basic Indy EZ heads. Nick Wilson over at www.compu-flow.com usually stocks the pistons and rods you need and can also cut the heads and help you with a cam to optimize your choices Gus 6997181-mysavoy.jpg (61 downloads) 64 Plymouth Savoy 493 Indy EZ's by Nick at Compu-Flow 5-Speed Richmond faceplate Liberty box Dana 60

Entire Thread
Subject	Posted By	Posted
Help on 440 build	sawdust	01/02/12 12:30 AM
Re: Help on 440 build	67mprfan	01/02/12 12:51 AM
Re: Help on 440 build	jamesc	01/02/12 12:52 AM
Re: Help on 440 build	gregsdart	01/02/12 02:40 PM
Re: Help on 440 build	sawdust	01/03/12 12:44 AM
Re: Help on 440 build	gregsdart	01/03/12 02:16 AM
Re: Help on 440 build	Cab_Burge	01/02/12 12:55 AM
Re: Help on 440 build	Mr.Yuck	01/02/12 01:50 AM
Re: Help on 440 build	sawdust	01/02/12 02:38 AM
Re: Help on 440 build	68roadrunner	01/02/12 02:57 AM
Re: Help on 440 build	WILD BILL	01/02/12 03:04 AM
Re: Help on 440 build	jamesc	01/02/12 03:31 AM
Re: Help on 440 build	383man	01/02/12 03:57 AM
Re: Help on 440 build	MikeyT	01/02/12 03:59 AM
Re: Help on 440 build	fourgearsavoy	01/02/12 04:03 AM
Re: Help on 440 build	viperblue72	01/02/12 06:10 AM
Re: Help on 440 build	dmking	01/02/12 07:35 AM
Re: Help on 440 build	sawdust	01/03/12 03:55 AM
Re: Help on 440 build	savoyracer	01/03/12 04:46 AM
Re: Help on 440 build	dmking	01/03/12 05:50 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1