Quote:
You might want to consider a K-member from a mid 80s 5th Avenue/Diplomat. That would give you the cradle mounts, transverse torsion bars, and disc brakes all in one unit. It could be bolted in or welded to your front subframe. The width should be close but could be fine tuned with the offset of your front wheels.
The full size 1960 Plymouths (Fury, Belvedere, Savoy) do not have a removable K Frame. It is all welded 1 piece. I have a factory parts manual and factory repair manual. Unfortunately at this time I can't get down my basement steps to get to them, but IIRC the dimensions are too much different between those cars and what I have. A 1960 V8 subframe is a straight bolt in.
Last edited by aquamist60; 09/02/11 03:05 PM.
