Quote:

thanks for the post Leon.
i am going to modify the pan or go to a different pan all together, which has been my plan.

i am real limited to the pan design because of the chassis of the Rambler with this chrylser motor in in. Its got to be a truck pan.

I had the pump cap and pick up made. The strainer is exact dimension of a milodon. Not even sure yet how my two pickup pump fits into the pan or if it will. If it doesn't then i will run the 2 line feed into one pick up. I like that idea pretty good too. My original plan was to block off the stock pick up orifice.

Changing cranks, putting the cast Eagle in it. It only costs $240 and they carry better oil pressure than stock cranks.



Isn't that like building kitchen cabinets without measuring the kitchen? Good luck with the Eagle cast crank, when it breaks don't blame whatever oil pickup you have.