This is what the machine shop thinks will work for me. Tell me what you think.

77 MH block (I already have it)
forged crank out of the 67 motor
forged pistons installed backwards to fit in the head pocket
9.7:1 compression
452 heads with heavier springs

Comp Cams XE285HL 21-228-4 http://www.compperformancegroupstores.co...WDGCAMhydFTxeHL

Torker 440 intake ( I already have it)
800 Holley DP carb ( I already have it)
and MSD 6AL Malory dist (that I already have)