|
Steel Shim Head Gasket Compressed Thickness?
#2515921
07/01/18 04:22 PM
07/01/18 04:22 PM
|
Joined: Apr 2008
Posts: 1,285 Pacific NW USA
CompSyn
OP
pro stock
|
OP
pro stock
Joined: Apr 2008
Posts: 1,285
Pacific NW USA
|
I'm trying to figure out what numbers to put into the compression ratio calculator? I have a set of: Mopar Performance Steel Shim Head Gasket Sets P4286754 -link The part number on the actual head gasket is #3614824 The advertised compressed thickness is 0.020" I mic'd them at 0.015" My question is, will the embossing give the gasket a compressed thickness closer to 0.020"? Or will the compressed thickness be closer to what I actually measured; 0.015"?
|
|
|
Re: Steel Shim Head Gasket Compressed Thickness?
[Re: CompSyn]
#2515980
07/01/18 06:24 PM
07/01/18 06:24 PM
|
Joined: Nov 2003
Posts: 36,040 Lincoln Nebraska
RapidRobert
Circle Track
|
Circle Track
Joined: Nov 2003
Posts: 36,040
Lincoln Nebraska
|
My question is, will the embossing give the gasket a compressed thickness closer to 0.020"? Or will the compressed thickness be closer to what I actually measured; 0.015"? what does the embossed raised ridge mike at?
live every 24 hour block of time like it's your last day on earth
|
|
|
Re: Steel Shim Head Gasket Compressed Thickness?
[Re: RapidRobert]
#2515998
07/01/18 07:07 PM
07/01/18 07:07 PM
|
Joined: Apr 2008
Posts: 1,285 Pacific NW USA
CompSyn
OP
pro stock
|
OP
pro stock
Joined: Apr 2008
Posts: 1,285
Pacific NW USA
|
My question is, will the embossing give the gasket a compressed thickness closer to 0.020"? Or will the compressed thickness be closer to what I actually measured; 0.015"? what does the embossed raised ridge mike at? The new one is 0.0355" The used original is 0.0195"
|
|
|
Re: Steel Shim Head Gasket Compressed Thickness?
[Re: CompSyn]
#2516010
07/01/18 07:33 PM
07/01/18 07:33 PM
|
Joined: Aug 2003
Posts: 43,127 Bend,OR USA
Cab_Burge
I Win
|
I Win
Joined: Aug 2003
Posts: 43,127
Bend,OR USA
|
The OEM 4.320 bore size(measure around 4.410 bore size) 440 stamp steel head gasket is suppose to be .017 compressed The earlier 361, 383, 413 and 426W Mopar OEM stamped steel head gasket was .022 compressed with the 4.320 or so bore size
Last edited by Cab_Burge; 07/01/18 07:34 PM.
Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)
|
|
|
|
|
|