Steel Shim Head Gasket Compressed Thickness?

Print Thread

Steel Shim Head Gasket Compressed Thickness? #2515921 07/01/18 04:22 PM 07/01/18 04:22 PM
Joined: Apr 2008 Posts: 1,285 Pacific NW USA CompSyn OP pro stock
CompSyn OP pro stock Joined: Apr 2008 Posts: 1,285 Pacific NW USA	I'm trying to figure out what numbers to put into the compression ratio calculator? I have a set of: Mopar Performance Steel Shim Head Gasket Sets P4286754 -link The part number on the actual head gasket is #3614824 The advertised compressed thickness is 0.020" I mic'd them at 0.015" My question is, will the embossing give the gasket a compressed thickness closer to 0.020"? Or will the compressed thickness be closer to what I actually measured; 0.015"?

Entire Thread
Subject	Posted By	Posted
Steel Shim Head Gasket Compressed Thickness?	CompSyn	07/01/18 08:22 PM
Re: Steel Shim Head Gasket Compressed Thickness?	lewtot184	07/01/18 09:07 PM
Re: Steel Shim Head Gasket Compressed Thickness?	RapidRobert	07/01/18 10:24 PM
Re: Steel Shim Head Gasket Compressed Thickness?	CompSyn	07/01/18 11:07 PM
Re: Steel Shim Head Gasket Compressed Thickness?	Cab_Burge	07/01/18 11:33 PM

Hop To