Took the 605 to the dyno...... - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Took the 605 to the dyno......

Print Thread

Page 1 of 2

1

2

Took the 605 to the dyno...... #803145 09/16/10 04:00 PM 09/16/10 04:00 PM
Joined: Sep 2005 Posts: 549 Chicagoland chargerron69 OP mopar
chargerron69 OP mopar Joined: Sep 2005 Posts: 549 Chicagoland	Took the engine to Rhyne Competition Engines in Gary IN. Very nice place and Matt is a great guy. Got it there Tuesday, they got right on it and hooked it up. Went this morning to see some pulls and it was definately worth every cent. i was really excited to have this experience. Ill post the sheets later when i can get them scanned to the comp. and go into detail on the runs. In the mean time lets hear some guesses on what you think it made. here are the specs 605ci Callies 4.75 stroke crank Oliver billet rods JE custom 10.72 compression gas ported pistons Mopar mega block 4.503 bore Indy 572-13 heads ported and flowed by mike radnis and bob mendez. T&D rocker arms on individual shafts. Smith Bros pushrods Straitline perf. roller cam 280/292 @ .050 .735/.723 on 112 lsa Crower Roller lifters that are rebuildable unlike most others. Milodon gear drive Milodon dual line oil system and pan. Indy valve covers with oiling inside Indy 440-3X intake ported throughout Pro Systems dominator carb with spec sheet. Cometic MLS head gaskets MSD Pro Billet distributor Taylor 10mm wires ATI Superdampener ARP hardware throughout, everything is studded but the intake custom set of headers 2.125 to 2.25 step with 4 inch collectors oh yea....and i got video! Last edited by chargerron69; 09/16/10 05:13 PM.

Re: Took the 605 to the dyno...... [Re: chargerron69] #803146 09/16/10 05:03 PM 09/16/10 05:03 PM
Joined: Jan 2003 Posts: 3,104 Wheels up, MO N nhramark master
nhramark master N Joined: Jan 2003 Posts: 3,104 Wheels up, MO	Compression is kind of low. No specs on the cam. Gas or alcohol carb? Pretty similar to my 540 other than Crank stroke and -13 heads vs my -1's. I have 13.8 compression. 875 hp? [image]http://s1126.photobucket.com/user/nhramark1/library/Racing[/image] 9.100 @ 150 mph 5.780 @ 120 mph

Re: Took the 605 to the dyno...... [Re: nhramark] #803147 09/16/10 05:15 PM 09/16/10 05:15 PM
Joined: Sep 2005 Posts: 549 Chicagoland chargerron69 OP mopar
chargerron69 OP mopar Joined: Sep 2005 Posts: 549 Chicagoland	added cam spec, its gas , its 1206 cfm Last edited by chargerron69; 09/16/10 05:55 PM. 67 Coronet 383 hogged out 906's 727 430 dana best 10.48 @126.80 1.47 60 on fogger same car pump gas 605 wedge 9.98 @ 138.42 1.50 60 on wore out 9 inch radial slick ss springs and frame connectors its got more in it!!! 72 Newport 2 door 400 727 85 Ram 440 4 speed O/D 3.54 dana

Re: Took the 605 to the dyno...... [Re: chargerron69] #803148 09/16/10 05:39 PM 09/16/10 05:39 PM
Joined: Sep 2008 Posts: 2,840 Flint, Michigan B1Fish540 master
B1Fish540 master Joined: Sep 2008 Posts: 2,840 Flint, Michigan	That'll be a stump puller! I'd guess 870 TQ and 890 HP.

Re: Took the 605 to the dyno...... [Re: chargerron69] #803149 09/16/10 05:45 PM 09/16/10 05:45 PM
Joined: Aug 2009 Posts: 87 Denmark D Dart of Denmark member
Dart of Denmark member D Joined: Aug 2009 Posts: 87 Denmark	925hp 6199987-HemiDart.jpg (152 downloads)

Re: Took the 605 to the dyno...... [Re: Dart of Denmark] #803150 09/16/10 06:01 PM 09/16/10 06:01 PM
Joined: Apr 2005 Posts: 2,128 Salt Lake City C camastomcat top fuel
camastomcat top fuel C Joined: Apr 2005 Posts: 2,128 Salt Lake City	825 HP and 810 Tourque

Re: Took the 605 to the dyno...... [Re: camastomcat] #803151 09/16/10 06:10 PM 09/16/10 06:10 PM
Joined: Mar 2009 Posts: 1,058 bigfork mn D dragram440 super stock
dragram440 super stock D Joined: Mar 2009 Posts: 1,058 bigfork mn	so what are the numbers. 67' charger 499 RB 10.57 at 127

Re: Took the 605 to the dyno...... [Re: dragram440] #803152 09/16/10 07:41 PM 09/16/10 07:41 PM
Joined: Jun 2007 Posts: 251 SD USA neonic enthusiast
neonic enthusiast Joined: Jun 2007 Posts: 251 SD USA	This sounds like it will probably be a spray motor?

Re: Took the 605 to the dyno...... [Re: neonic] #803153 09/16/10 07:52 PM 09/16/10 07:52 PM
Joined: Jan 2003 Posts: 6,314 The Swamp MegaDart master
MegaDart master Joined: Jan 2003 Posts: 6,314 The Swamp	I hope it made A LOT!! My 604ci made 1156hp and 856ftlb. 4.5" stroke 4.62 bore BBC. Single cast four barrel intake with 1150 dominator

Re: Took the 605 to the dyno...... [Re: MegaDart] #803154 09/16/10 07:58 PM 09/16/10 07:58 PM
Joined: Nov 2003 Posts: 10,384 Upstate NY Bigcube I Live Here
Bigcube I Live Here Joined: Nov 2003 Posts: 10,384 Upstate NY	Quote: I hope it made A LOT!! My 604ci made 1156hp and 856ftlb. 4.5" stroke 4.62 bore BBC. Single cast four barrel intake with 1150 dominator I'm sure yours was a touch over 10.7 sgueeze with a bit bigger heads. This is an odd combo, definitely pump gas friendly. The bigger heads and good bottom end parts lead me to think you will be giving it a bit of the hose. NA 825 HP/800 ft/lbs. Jim

Re: Took the 605 to the dyno...... [Re: Bigcube] #803155 09/16/10 08:02 PM 09/16/10 08:02 PM
Joined: Jun 2009 Posts: 438 Great Lakes Region A abodiesonly1 mopar
abodiesonly1 mopar A Joined: Jun 2009 Posts: 438 Great Lakes Region	Is this the one that was for sale? 851/821

Re: Took the 605 to the dyno...... [Re: abodiesonly1] #803156 09/16/10 09:19 PM 09/16/10 09:19 PM
Joined: Mar 2009 Posts: 1,169 Virginia Beach, VA O Old School super stock
Old School super stock O Joined: Mar 2009 Posts: 1,169 Virginia Beach, VA	900hp-800tq 68 cuda formula S 588" bb 5sp 70 CUDA CONVERT 500" 5SP (SUBLIME) 70 CUDA CONVERT 500" 5SP (PLUMCRAZY):TOO MUCH HORSEPOWER, IS ALMOST ENOUGH!

Re: Took the 605 to the dyno...... [Re: chargerron69] #803157 09/16/10 09:21 PM 09/16/10 09:21 PM
Joined: Dec 2008 Posts: 90 Chandler, AZ cirrusaero member
cirrusaero member Joined: Dec 2008 Posts: 90 Chandler, AZ	Looking forward to seeing what this pulls.......... and the video 68 Charger 605 Hemi, Keisler 5spd, Pro-touring 66 Coronet 2dr post 66 Satellite

Re: Took the 605 to the dyno...... [Re: chargerron69] #803158 09/16/10 10:12 PM 09/16/10 10:12 PM
Joined: Aug 2003 Posts: 509 duluth,mn P psycomopar mopar
psycomopar mopar P Joined: Aug 2003 Posts: 509 duluth,mn	i would like to know for sure i have one at shop right know . touch but different b1 heads and cam specs are bigger.and about 15 t0 1. i know i am really curious to see what mine makes i have thought about taming the combo down before finishing though. i guess about 925hp 870tq Last edited by psycomopar; 09/16/10 10:14 PM.

Re: Took the 605 to the dyno...... [Re: cirrusaero] #803159 09/16/10 10:14 PM 09/16/10 10:14 PM
Joined: May 2005 Posts: 1,995 Apollo, PA. B1MAXX top fuel
B1MAXX top fuel Joined: May 2005 Posts: 1,995 Apollo, PA.	raised cam block?

Re: Took the 605 to the dyno...... [Re: MegaDart] #803160 09/16/10 10:29 PM 09/16/10 10:29 PM
Joined: Apr 2005 Posts: 1,106 Quebec, Canada D Diablo super stock
Diablo super stock D Joined: Apr 2005 Posts: 1,106 Quebec, Canada	Quote: I hope it made A LOT!! My 604ci made 1156hp and 856ftlb. 4.5" stroke 4.62 bore BBC. Single cast four barrel intake with 1150 dominator Pretty sure that engine isn't with the 572-13 heads. My guess is 912hp 845torque

Re: Took the 605 to the dyno......UPDATE! [Re: Diablo] #803161 09/17/10 12:08 AM 09/17/10 12:08 AM
Joined: Sep 2005 Posts: 549 Chicagoland chargerron69 OP mopar
chargerron69 OP mopar Joined: Sep 2005 Posts: 549 Chicagoland	here it is guys! wish it was little higher compression but is what it is, and its more than i thought it was, and has a really smooth power curve! special thanks to Bob Mendez! you built another mighty mopar motor! http://www.youtube.com/watch?v=HCy61dQ79R4 Last edited by chargerron69; 09/17/10 12:39 AM. 67 Coronet 383 hogged out 906's 727 430 dana best 10.48 @126.80 1.47 60 on fogger same car pump gas 605 wedge 9.98 @ 138.42 1.50 60 on wore out 9 inch radial slick ss springs and frame connectors its got more in it!!! 72 Newport 2 door 400 727 85 Ram 440 4 speed O/D 3.54 dana

Re: Took the 605 to the dyno......UPDATE! [Re: chargerron69] #803162 09/17/10 12:18 AM 09/17/10 12:18 AM
Joined: Nov 2003 Posts: 10,384 Upstate NY Bigcube I Live Here
Bigcube I Live Here Joined: Nov 2003 Posts: 10,384 Upstate NY	Nice street motor for sure!

Re: Took the 605 to the dyno......UPDATE! [Re: chargerron69] #803163 09/17/10 02:08 AM 09/17/10 02:08 AM
Joined: Sep 2008 Posts: 2,840 Flint, Michigan B1Fish540 master
B1Fish540 master Joined: Sep 2008 Posts: 2,840 Flint, Michigan	I was way off on the TQ, but pretty close on the HP. Congrats those are good numbers for that combo!

Re: Took the 605 to the dyno......UPDATE! [Re: chargerron69] #803164 09/17/10 03:27 AM 09/17/10 03:27 AM
Joined: Aug 2003 Posts: 43,228 Bend,OR USA C Cab_Burge I Win
Cab_Burge I Win C Joined: Aug 2003 Posts: 43,228 Bend,OR USA	Are the oil and water temps correct or are they transposed on the data tracking? Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)

Page 1 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1