Moparts

Took the 605 to the dyno......

Posted By: chargerron69

Took the 605 to the dyno...... - 09/16/10 08:00 PM

Took the engine to Rhyne Competition Engines in Gary IN. Very nice place and Matt is a great guy.
Got it there Tuesday, they got right on it and hooked it up. Went this morning to see some pulls and it was definately worth every cent. i was really excited to have this experience. Ill post the sheets later when i can get them scanned to the comp. and go into detail on the runs. In the mean time lets hear some guesses on what you think it made. here are the specs

605ci
Callies 4.75 stroke crank
Oliver billet rods
JE custom 10.72 compression gas ported pistons
Mopar mega block 4.503 bore
Indy 572-13 heads ported and flowed by mike radnis and bob mendez.
T&D rocker arms on individual shafts.
Smith Bros pushrods
Straitline perf. roller cam 280/292 @ .050 .735/.723 on 112 lsa
Crower Roller lifters that are rebuildable unlike most others.
Milodon gear drive
Milodon dual line oil system and pan.
Indy valve covers with oiling inside
Indy 440-3X intake ported throughout
Pro Systems dominator carb with spec sheet.
Cometic MLS head gaskets
MSD Pro Billet distributor
Taylor 10mm wires
ATI Superdampener
ARP hardware throughout, everything is studded but the intake
custom set of headers 2.125 to 2.25 step with 4 inch collectors

oh yea....and i got video!
Posted By: nhramark

Re: Took the 605 to the dyno...... - 09/16/10 09:03 PM

Compression is kind of low.
No specs on the cam.
Gas or alcohol carb?

Pretty similar to my 540 other than Crank stroke and -13 heads vs my -1's. I have 13.8 compression.

875 hp?
Posted By: chargerron69

Re: Took the 605 to the dyno...... - 09/16/10 09:15 PM

added cam spec, its gas , its 1206 cfm
Posted By: B1Fish540

Re: Took the 605 to the dyno...... - 09/16/10 09:39 PM

That'll be a stump puller! I'd guess 870 TQ and 890 HP.
Posted By: Dart of Denmark

Re: Took the 605 to the dyno...... - 09/16/10 09:45 PM

925hp

Attached picture 6199987-HemiDart.jpg
Posted By: camastomcat

Re: Took the 605 to the dyno...... - 09/16/10 10:01 PM

825 HP and 810 Tourque
Posted By: dragram440

Re: Took the 605 to the dyno...... - 09/16/10 10:10 PM

so what are the numbers.
Posted By: neonic

Re: Took the 605 to the dyno...... - 09/16/10 11:41 PM

This sounds like it will probably be a spray motor?
Posted By: MegaDart

Re: Took the 605 to the dyno...... - 09/16/10 11:52 PM

I hope it made A LOT!!
My 604ci made 1156hp and 856ftlb. 4.5" stroke 4.62 bore BBC. Single cast four barrel intake with 1150 dominator
Posted By: Bigcube

Re: Took the 605 to the dyno...... - 09/16/10 11:58 PM

Quote:

I hope it made A LOT!!
My 604ci made 1156hp and 856ftlb. 4.5" stroke 4.62 bore BBC. Single cast four barrel intake with 1150 dominator



I'm sure yours was a touch over 10.7 sgueeze with a bit bigger heads.

This is an odd combo, definitely pump gas friendly. The bigger heads and good bottom end parts lead me to think you will be giving it a bit of the hose.

NA 825 HP/800 ft/lbs.
Posted By: abodiesonly1

Re: Took the 605 to the dyno...... - 09/17/10 12:02 AM

Is this the one that was for sale?



851/821
Posted By: Old School

Re: Took the 605 to the dyno...... - 09/17/10 01:19 AM

900hp-800tq
Posted By: cirrusaero

Re: Took the 605 to the dyno...... - 09/17/10 01:21 AM

Looking forward to seeing what this pulls.......... and the video
Posted By: psycomopar

Re: Took the 605 to the dyno...... - 09/17/10 02:12 AM

i would like to know for sure i have one at shop right know . touch but different b1 heads and cam specs are bigger.and about 15 t0 1. i know i am really curious to see what mine makes i have thought about taming the combo down before finishing though. i guess about 925hp 870tq
Posted By: B1MAXX

Re: Took the 605 to the dyno...... - 09/17/10 02:14 AM

raised cam block?
Posted By: Diablo

Re: Took the 605 to the dyno...... - 09/17/10 02:29 AM

Quote:

I hope it made A LOT!!
My 604ci made 1156hp and 856ftlb. 4.5" stroke 4.62 bore BBC. Single cast four barrel intake with 1150 dominator




Pretty sure that engine isn't with the 572-13 heads.

My guess is 912hp 845torque
Posted By: chargerron69

Re: Took the 605 to the dyno......UPDATE! - 09/17/10 04:08 AM

here it is guys! wish it was little higher compression but is what it is, and its more than i thought it was, and has a really smooth power curve! special thanks to Bob Mendez! you built another mighty mopar motor!






http://www.youtube.com/watch?v=HCy61dQ79R4
Posted By: Bigcube

Re: Took the 605 to the dyno......UPDATE! - 09/17/10 04:18 AM

Nice street motor for sure!
Posted By: B1Fish540

Re: Took the 605 to the dyno......UPDATE! - 09/17/10 06:08 AM

I was way off on the TQ, but pretty close on the HP. Congrats those are good numbers for that combo!
Posted By: Cab_Burge

Re: Took the 605 to the dyno......UPDATE! - 09/17/10 07:27 AM

Are the oil and water temps correct or are they transposed on the data tracking?
Posted By: nhramark

Re: Took the 605 to the dyno......UPDATE! - 09/17/10 02:44 PM

881 hp and I estimated 875, guess I win...... nothing.

Did you make any pulls without the vacuum pump? I wonder how much hp I'd gain with a pump and gas ported pistons.

Nice motor.....
Posted By: Thumperdart

Re: Took the 605 to the dyno......UPDATE! - 09/17/10 05:23 PM

That`s one stout street motor and should be FUN,FUN,FUN...............
Posted By: TonyS451

Re: Took the 605 to the dyno......UPDATE! - 09/18/10 02:48 AM

Hey Ron - That is one bad street engine Great job on the build BoBo. Is it still for sale??
Posted By: 70blackfish

Re: Took the 605 to the dyno......UPDATE! - 09/18/10 02:40 PM

NICE
Posted By: camastomcat

Re: Took the 605 to the dyno......UPDATE! - 09/18/10 03:10 PM

It's a killer street motor but I would have thought it would make more torque with the extra stroke. If you want 100 more HP all you need is compression in a race only app.
Posted By: chargerron69

Re: Took the 605 to the dyno......UPDATE! - 09/18/10 11:29 PM

Quote:

Hey Ron - That is one bad street engine Great job on the build BoBo. Is it still for sale??





yea it is but nobody is gonna come get it till its in the car already by then it might be too late

thanks for all the posts and interest guys
Posted By: 67dodge67

Re: Took the 605 to the dyno......UPDATE! - 09/19/10 01:00 AM

Wow!! Could I have that in my Coronet? Yah, I think I already answered my question...

Awesome...

Attached picture 6203637-coronet.jpg
© 2024 Moparts Forums