Im really liking these cars!!!! Combo and times would be great too.

Before the crash...
Dont want to show aftermath or look at it myself.

It's a 423ci small block based off a 340 R Block bored .040 over, oil mods done by RyanJ, Pro-Gram billet caps 1-4, and has a K1 crank and rods. The rods are 6.200 long and the crank stroke is 4.125. It has custom CP pistons to produce a 13.5:1 compression with Total Seal Max Seal rings. The heads are INDY 360-2 CNC ported and polished by RyanJ that flow 325/250. The intake is a MP M-1 single plane converted to a Dominator flange and ported by RyanJ as well. The cam is a bullet solid roller with 276/280 duration at .050 with .696/.712 lift with a 1.6 ratio rocker and ground on a 109. The carb is a Big's 1050 Dominator Stage 7. I'm using the T&D rocker setup and Smith Brothers .116 wall 5/16 pushrods. I have the lifter bores bushed because I'm oiling through the pushrod. I have the Charlie's 8 quart pan with a Milodon pickup and a Sealed Power HV oil pump. I'm running TTI 1-7/8" headers as well. I'm using a MSD Digital 6 Plus box with a MSD HVC II Coil and a MSD Pro Billet Distributor. I race at 600 feet above see level and use 110 octane Sunoco fuel.

3430lb. Race Ready F-Body (with me)
Ford 9" with a 4.56 gear
CRT Super Pro II 727 trans with brake
29.5x10.5x15 M/T ET Drag
Skinnies on front
5400 stall 8" PTC converter
Solid K-Frame Bushings
Subframe connectors
Engine torque strap
6-Point cage
Caltracs with their monoleafs and Rancho 9000's
3" full exhaust with Dynomax Oval Ultra Flo's

This combo has ran a best of 10.25 @ 132.77 mph

How about a side view???

Full cage, 14x32s, 4 Link dana, struts - rack and pinion front, Mild pump gas Hyd cam 440, Powerglide with T-brake, shiftnoid, delay Box
Used to go 10s, now de-tuned to run super consistant mid 11s
Easy low maint. Super Pro car, but I have been too busy to even have it out this year, I may decide to race it at the Mopar Nats. with a For Sale sign in the window

http://mopardragracing.ning.com/video/gran-fury-at-columbus-chrysler there is a video of mine not really that good of a video but u can hear how nice it sounds. runs 13.0's mostly should be faster, with A 360 in it but full interior, exhaust, taged and titled..

Your right,It DOES sound good!!!!!

I just wish it was little faster than it was. but i like them because u dont see many of them at the track..

Here is my sons, 408 W2 Ryan J roller cam, ported heads 904/999 w/low gearset,8 3/4,SS springs, best 60'1.37 Best time to date 9.94 MPH I'm not sure of but think it was 136

Here's mine its a 78 with a 440 MCH stage 2 cnc'd eddy rpms a .630/.650 solid lift 10.75 comp m1 intake with some work a 10in tci 3500 stall 950hp carb 2in tti headers and 3in ext weights close to 3700lbs with me in it best et is 11.05 @ 122 and 8 3/4 with 4.10s and a spool. Pump gas and street driven

I'd like to see that Aspen go 9 seconds!!!

Nice car I seen it at the cc at martin this year me and dad we standing at the fence talking to you.the blower really sets it off

Just a std. stroker with 2 stage spray, switched to a crt pro race auto, time will tell

Sweet video!!!! Nice car!!!!