Does anyone have pics of the engine pulley and belt arrangement on an original 73 Duster w/ AC & PS?

Thanks

I posted pics of a survivor 73 340 a/c duster. But I think the pictures are gone from
Moparts:(

Links:

https://board.moparts.org/ubbthreads/ubbt...60-1972-up.html

https://board.moparts.org/ubbthreads/ubbt...e-survivor.html

Pics

That is how the belts/pulleys look on my 70 Sport Satellite, 318 with AC . . . two belts for the alternator and AC compressor. One belt for the water pump, fan and power steering pump.

Is there an idler pulley in the configuration?

The car in the shop has an idler pulley as well.

Someone had monkey'd with the ps pump and the books have no good detail on this set up.

Pretty sure it would be like my 70, with no idler . . .just the belt on power steering pump going round the ps pump and the water pump and the crankshaft.

Here is pic putting engine into car, just did not have the fan and pulley on water pump . . . that is all there is for the ps pump and water pump. This pic shows missing triangular shaped bracket that goes behind front bracket of power steering pump. Should be behind the bracket with adjustment slot - finally figured that out !!! Doesn't matter if saginaw or federal ps pump . . . still need the small triangular bracket that mounts to water pump and adds support for the slotted adjustment bracket . . .

Cheers

No idler.

I have 20-30 detail pics of this car in higher quality. The pics I posted are the only one of the pulleys. Email me direct at info@cpwclub.com if you need other pics.