|
84 d150 wiring problem
#1690532
10/25/14 10:37 PM
10/25/14 10:37 PM
|
Joined: Dec 2004
Posts: 1,176 Crockett ,TX
98RAM1500
OP
super stock
|
OP
super stock
Joined: Dec 2004
Posts: 1,176
Crockett ,TX
|
everything works except turn signals and the gauges, lights in the cluster work & lights work inside and out and it will turn the engine over but as far the gauges reading they don't in any of the positions & turn signals only work in accesories but won't in the on position & the blower motor won't work & yes it does work when directly to the battery, out of ideas on what it could be
Last edited by 98RAM1500; 10/26/14 09:50 AM.
|
|
|
Re: 84 d150 wiring problem
[Re: 98RAM1500]
#1690533
10/26/14 09:34 AM
10/26/14 09:34 AM
|
Joined: Dec 2004
Posts: 1,176 Crockett ,TX
98RAM1500
OP
super stock
|
OP
super stock
Joined: Dec 2004
Posts: 1,176
Crockett ,TX
|
Checked all grounds they are good. Checked all the gauges before install they were good. Wiper motor only works in accessories as well only thing left to check is bulkhead connector
Last edited by 98RAM1500; 10/26/14 09:44 AM.
|
|
|
Re: 84 d150 wiring problem
[Re: 98RAM1500]
#1690534
10/26/14 09:48 AM
10/26/14 09:48 AM
|
Joined: Dec 2004
Posts: 1,176 Crockett ,TX
98RAM1500
OP
super stock
|
OP
super stock
Joined: Dec 2004
Posts: 1,176
Crockett ,TX
|
What would keep the gauges from not reading at all & turn signals, wiper motor & blower motor not working in the on position?
Last edited by 98RAM1500; 10/26/14 09:49 AM.
|
|
|
Re: 84 d150 wiring problem
[Re: 98RAM1500]
#1690535
10/26/14 10:45 AM
10/26/14 10:45 AM
|
Joined: Nov 2003
Posts: 10,228 Colleyville
3hundred
I Live Here
|
I Live Here
Joined: Nov 2003
Posts: 10,228
Colleyville
|
Sounds like ignition switch from here.
Robert
'68 Fury Convertible '69 300 Convertible '15 Durango 5.7 Hemi '16 300 S Hemi
|
|
|
Re: 84 d150 wiring problem
[Re: scratchnfotraction]
#1690538
10/26/14 02:07 PM
10/26/14 02:07 PM
|
Joined: Jan 2003
Posts: 21,085 Niles , Ohio
therocks
oh wait.but hey.lets see.oh yeah.
|
oh wait.but hey.lets see.oh yeah.
Joined: Jan 2003
Posts: 21,085
Niles , Ohio
|
The blower if it has power to the switch its probally the switch.I dont know how many I replaced in mine and customers trucks.Look at the amp gauge also.they do burn.The ign switchs were problems also. Rocky
Chrysler Firepower
|
|
|
Re: 84 d150 wiring problem
[Re: 3hundred]
#1690542
10/27/14 02:15 PM
10/27/14 02:15 PM
|
Joined: Sep 2003
Posts: 7,833 east side of Ohio
basketcase
master
|
master
Joined: Sep 2003
Posts: 7,833
east side of Ohio
|
bet it's the dash switch, I've had a couple go bad. And anytime I'm in a boneyard, I always look inside a truck for a spare switch, and they are almost always already gone. Usually the high terminal melts off.Or the plastic mounts break.
Dave
1981 Dodge D150 360 auto
|
|
|
|
|
|