Posted By: 98RAM1500
84 d150 wiring problem - 10/26/14 02:37 AM
everything works except turn signals and the gauges, lights in the cluster work & lights work inside and out and it will turn the engine over but as far the gauges reading they don't in any of the positions & turn signals only work in accesories but won't in the on position & the blower motor won't work & yes it does work when directly to the battery, out of ideas on what it could be
Posted By: 98RAM1500
Re: 84 d150 wiring problem - 10/26/14 01:34 PM
Checked all grounds they are good. Checked all the gauges before install they were good. Wiper motor only works in accessories as well only thing left to check is bulkhead connector
Posted By: 98RAM1500
Re: 84 d150 wiring problem - 10/26/14 01:48 PM
What would keep the gauges from not reading at all & turn signals, wiper motor & blower motor not working in the on position?
Posted By: 3hundred
Re: 84 d150 wiring problem - 10/26/14 02:45 PM
Sounds like ignition switch from here.
Robert
Posted By: 98RAM1500
Re: 84 d150 wiring problem - 10/26/14 03:26 PM
I was thinking that to but tried a old ignition switch out of another column & still the same thing what would be the chances of two bad switches one new & other old
check the fuse box for the gauge fuse.
have a look at the fusable links and take the bulk head connection apart and check each wire connector.
I been chasing sorta the same problem on my 85..everything works till the headlights comes on then no rear brake/turn sigs. brake light are on though.
changed everything but headlight switch on mine.
that's next on the list.
Posted By: therocks
Re: 84 d150 wiring problem - 10/26/14 06:07 PM
The blower if it has power to the switch its probally the switch.I dont know how many I replaced in mine and customers trucks.Look at the amp gauge also.they do burn.The ign switchs were problems also.
Rocky
Posted By: 98RAM1500
Re: 84 d150 wiring problem - 10/27/14 04:17 AM
Now everything is working went ahead started the new engine & broke the can & lifters in & while it was idling I tried the turn signals and they work now and so do the gauges thank god
Posted By: 98RAM1500
Re: 84 d150 wiring problem - 10/27/14 04:44 PM
It was the ignition switch but blower motor still doesn't work unless I hook it directly to battery
Posted By: basketcase
Re: 84 d150 wiring problem - 10/27/14 06:15 PM
bet it's the dash switch, I've had a couple go bad. And anytime I'm in a boneyard, I always look inside a truck for a spare switch, and they are almost always already gone. Usually the high terminal melts off.Or the plastic mounts break.