Vacuum pumps
#1682295
10/05/14 03:02 PM
10/05/14 03:02 PM
|
Joined: Feb 2009
Posts: 1,532 off the grid
340B5
OP
pro stock
|
OP
pro stock
Joined: Feb 2009
Posts: 1,532
off the grid
|
Anybody run an aerospace components vac pump? How do you like it?
Also, does anyone use an oem smog pump to pull vacuum and how long do they last?
Yeah, it's got a smallblock.
|
|
|
Re: Vacuum pumps
[Re: 340B5]
#1682296
10/05/14 04:25 PM
10/05/14 04:25 PM
|
Joined: Oct 2007
Posts: 3,978 Hilltown Pa
1967dartgt
master
|
master
Joined: Oct 2007
Posts: 3,978
Hilltown Pa
|
My buddy has one he will sell you. He said it was junk. He has a GZ now and I have a three vane moroso.
Last edited by 1967dartgt; 10/05/14 04:26 PM.
Brett Miller W9 cnc'd heads STR Chassis fabraction
|
|
|
Re: Vacuum pumps
[Re: 1967dartgt]
#1682298
10/05/14 11:16 PM
10/05/14 11:16 PM
|
Joined: Jul 2010
Posts: 2,422 Pittsburgh PA
Eric
top fuel
|
top fuel
Joined: Jul 2010
Posts: 2,422
Pittsburgh PA
|
Wafflebatter on here with the SBC Roadster has one..it works for him. I've heard the GZ is a nice piece.
5.53 @ 125 1/8th on the launch control..more left in her!
|
|
|
Re: Vacuum pumps
[Re: Cab_Burge]
#1682300
10/06/14 12:59 PM
10/06/14 12:59 PM
|
Joined: Jan 2012
Posts: 2,666 Stuttgart, Arkansas
rickseeman
master
|
master
Joined: Jan 2012
Posts: 2,666
Stuttgart, Arkansas
|
I would be happy with 12 inches. I don't like those horror stories associated with 20 inches. And it's not like it's gonna make your car a whole lot faster.
2011 Drag Pak Challenger
|
|
|
Re: Vacuum pumps
[Re: 340B5]
#1682304
10/06/14 10:19 PM
10/06/14 10:19 PM
|
Joined: Nov 2006
Posts: 733 jacksonville,FLORIDA
slammedR/T
super stock
|
super stock
Joined: Nov 2006
Posts: 733
jacksonville,FLORIDA
|
Quote:
Quote:
Love my aerospace vacuum pump.
How long have you had that pump?
Over a year now, I bought the releif valve that goes on the pump, have a vacuum gauge in the othe valve cover, about 5-8 inches at idle and 12-15 WOT.
2000 Dakota R/T, 408 magnum, 727, Indy heads 1000cfm 4150 carb, 93 octane fuel. motor; 10.258 @ 132.78 200 shot; 9.262 @ 144.69 racemagnum
|
|
|
Re: Vacuum pumps
[Re: 340B5]
#1682305
10/07/14 10:16 AM
10/07/14 10:16 AM
|
Joined: Jan 2003
Posts: 13,377 Marion, South Carolina [><]
an8sec70cuda
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 13,377
Marion, South Carolina [><]
|
I have an Aerospace vacuum pump and I do NOT recommend anyone else getting one. Mine pulls 6-8" at WOT and that's w/ the regulator maxed out. My first one lost vacuum, rebuilt it, then it later destroyed itself (shaft seized). I got another one only b/c they cut me a good deal on a replacement and the cost to change to another brand of pump was real high at the time. Aerospace's drive mandrel sucks too. No way to lock down the pullies good (just a little set screw) so they'll work loose, then they gall the shaft. When the pump locked up, it tweaked the shaft on the mandrel and caused a vibration. I have a mandrel setup from CV products now...MUCH nicer and stronger. When my current pump fails, I'll probably get one from GZ.
CHIP '70 hemicuda, 575" Hemi, 727, Dana 60 '69 road runner, 440-6, 18 spline 4 speed, Dana 60 '71 Demon, 340, low gear 904, 8.75 '73 Chrysler New Yorker, 440, 727, 8.75 '90 Chevy 454SS Silverado, 476" BBC, TH400, 14 bolt '06 GMC 2500HD LBZ Duramax
|
|
|
|
|