Re: What cam in your SB stroker ?
[Re: Wedgeman]
#1517593
10/14/13 08:35 PM
10/14/13 08:35 PM
|
Joined: Jan 2003
Posts: 4,616
Kissimmee Fl.
dusturbd340W5
master
|
master
Joined: Jan 2003
Posts: 4,616
Kissimmee Fl.
|
my old 416 was a solid roller 268/272@ .050 .690 lift 9.76 at 138 in a 3000lb car.
70 duster full chassis super pro 416 CNC Indybrock heads 727 w/brake
best so far 1.212 60 6.219 in 1/8 at 110.88 9.768 at 137.81 1/4
|
|
|
Re: What cam in your SB stroker ?
[Re: dusturbd340W5]
#1517594
10/14/13 08:48 PM
10/14/13 08:48 PM
|
Joined: Dec 2006
Posts: 3,395
Pa
Hot 340
master
|
master
Joined: Dec 2006
Posts: 3,395
Pa
|
Quote:
my old 416 was a solid roller 268/272@ .050 .690 lift 9.76 at 138 in a 3000lb car.
just a little  question.. but would/could you drive this grind with this cubic inch combo on the street? Behaviour?
|
|
|
Re: What cam in your SB stroker ?
[Re: Wedgeman]
#1517595
10/14/13 09:09 PM
10/14/13 09:09 PM
|
Joined: Oct 2009
Posts: 1,267
North, Alabama
D-50
pro stock
|
pro stock
Joined: Oct 2009
Posts: 1,267
North, Alabama
|
Mine is 255/266 @.050. Solid roller,but mine is only a 394 ci.
Last edited by D-50; 10/14/13 09:11 PM.
1.33 60 ft,6.21 at 110.59 in the 1/8, pump gas small block,2950lbs,drag radials,mufflers and driven to track ...
|
|
|
Re: What cam in your SB stroker ?
[Re: Hot 340]
#1517596
10/14/13 11:28 PM
10/14/13 11:28 PM
|
Joined: Jun 2004
Posts: 1,496
Sask, Can.
72demon416
pro stock
|
pro stock
Joined: Jun 2004
Posts: 1,496
Sask, Can.
|
Quote:
Quote:
my old 416 was a solid roller 268/272@ .050 .690 lift 9.76 at 138 in a 3000lb car.
just a little question.. but would/could you drive this grind with this cubic inch combo on the street? Behaviour?
I'm a little more cubes at 439 but I run a .725 lift 272/276 and it is street driven lots (as much as possible with our short season) and it's street manners are just fine. Actually could have been more radical and been ok yet.
|
|
|
Re: What cam in your SB stroker ?
[Re: Wedgeman]
#1517599
10/15/13 12:25 PM
10/15/13 12:25 PM
|
Joined: Dec 2006
Posts: 1,178
Indy
FlyFish
super stock
|
super stock
Joined: Dec 2006
Posts: 1,178
Indy
|
Small solid roller, 248/254 duration, .576/.582 lift, pump gas street car, 3200 lbs, 6.81 @ 99.7 in the 1/8 (high 10.70's in the 1/4).
67 Barracuda street car, 408, e85, 1.38 60', 6.44 @105.9 in the 1/8 mile, 10.19 @130.5 in the 1/4...so far....
|
|
|
Re: What cam in your SB stroker ?
[Re: Ian]
#1517603
10/17/13 07:41 PM
10/17/13 07:41 PM
|
Joined: Oct 2009
Posts: 1,267
North, Alabama
D-50
pro stock
|
pro stock
Joined: Oct 2009
Posts: 1,267
North, Alabama
|
Quote:
solid roller 254/262 0n 107 lc 660 lift .3550 lbs 1.37 60 ft 6.0 113 and [Email]9.57@142[/Email]
You are running NOS also, correct?
1.33 60 ft,6.21 at 110.59 in the 1/8, pump gas small block,2950lbs,drag radials,mufflers and driven to track ...
|
|
|
Re: What cam in your SB stroker ?
[Re: D-50]
#1517607
10/18/13 02:32 AM
10/18/13 02:32 AM
|
Joined: Jan 2009
Posts: 1,044
Victoria, Australia
Ian
super stock
|
super stock
Joined: Jan 2009
Posts: 1,044
Victoria, Australia
|
Quote:
Quote:
solid roller 254/262 0n 107 lc 660 lift .3550 lbs 1.37 60 ft 6.0 113 and [Email]9.57@142[/Email]
You are running NOS also, correct?
correct 
|
|
|
Re: What cam in your SB stroker ?
[Re: Ian]
#1517608
10/18/13 01:14 PM
10/18/13 01:14 PM
|
Joined: Dec 2009
Posts: 20,640
in a cattle trailer down by th...
Guitar Jones
Paddle faster! I hear banjo music!
|
Paddle faster! I hear banjo music!
Joined: Dec 2009
Posts: 20,640
in a cattle trailer down by th...
|
Old Crane SS solid roller. 276/282 @ .050 and net lift with lash and 1.6 rockers is .698/.714. 408, W5's and 2-750's on a M1 TR. Probably not an ideal cam but it was only $75.00 with only 10 dyno pulls on it. 
"Follow me the wise man said, but he walked behind"
'92 D250 Club Cab CTD, 47RH conversion, pump tweaks, injectors, rear disc and hydroboost conversion.
'74 W200 Crew Cab 360, NV4500, D44, D60 and NP205 divorced transfer case. Rear disc and hydroboost conversion.
2019 1500 Long Horn Crew Cab 4WD, 5.7 Hemi.
|
|
|
Re: What cam in your SB stroker ?
[Re: Guitar Jones]
#1517609
10/18/13 02:35 PM
10/18/13 02:35 PM
|
Joined: Sep 2007
Posts: 35
Minot, ND
darndart
member
|
member
Joined: Sep 2007
Posts: 35
Minot, ND
|
Just putting the finishing assembly on a 410 for my 73 Dart Sport. It's got a Comp Solid Roller 269/276 @ .050 with .698/.698 w/ 1.6's. Hope to run in the 9.70 range!
73 Dart Sport 340, 410ci, Indy 360-2 230CNC.
72 Demon 340 4-speed
01 Ram Quad Cab
89 Mustang LX Boss 331,C4,HP76mm turbo, FAST EFI
86 Mustang GT 5.0 AOD
82 Capri RS 306, Fox Lake Stage 1 TW, N41, T5,etc.
|
|
|
Re: What cam in your SB stroker ?
[Re: darndart]
#1517610
10/18/13 02:39 PM
10/18/13 02:39 PM
|
Joined: Jan 2003
Posts: 9,826
las vegas
70AARcuda
master
|
master
Joined: Jan 2003
Posts: 9,826
las vegas
|
got a 408 with ported eddy heads, with KB icon 744 pistons and scat I beam rods, Cam is a hughes 264/268 flat tappet with crane gold rockers...
Engine is still on engine stand...
Tony
70 AARCuda Vitamin C
71 Dart Swinger 360 10.318 @ 128.22(10-04-14 Bakersfield)
71 Demon 360 10.666 @122.41 (01-29-17 @ Las Vegas)
71 Duster 408 (10.29 @ 127.86 3/16/19 Las Vegas)
|
|
|
|
|
